I have a v6 2.8l 84' camaro and i am attemting to rebuild the carb which is a 2se rochester 2bbl and for the life of me cannot fine a video on how to rebuild one.
i would consult my instructions that came with the carb kit but i am dyslexic with diagrams and cannot understand them at all. if anyone could help me out it would be greatly appreciated
thank you.

 

figured it out now im having the problem itll start but will not stay running it drops down to 500rpm n stalls out what do i do?

 

First make sure the idle mixture screw is set right, start with 1 1/2 turns out from bottomed out and tune it from there.
Then adjust the throttle stop screw on the linkage arm to get the curb idle to where you want it.

 

thank you for the help did that all and then played with the vacuums a little and found a vacuum was drawing too much air as well

 

hey what about Youtube. i remember seeing a similar video there. try searching for it.

 

i once saw a video about this on youtube or dailymotion just go there and search

 

Don't forget to let us know how things work out.