New project 75 lt 350 zz3 4spd car
Thread Starter
|
In the Staging Lanes
Joined: Sep 2010
Posts: 79
ok thanks now my electric fuel pump is acting up 67 lbs then 1 then 6,7 then 2 whT'S THE DEAL IS IT GOING? I TIGHTENED SOME OF THE LINES NO CHANGE AND PLAYED WITH REGLATER
Overdrive Member
Joined: Nov 2009
Posts: 4,848
From: off the grid
67? First what range gauge do you have? 67 lbs would blow the needle off seat to the point of the vent tubes becoming fountains. 1-15lb gauge is all you need for a carb. Anything else is just going to be less accurate. Your pump is probably only making 14 wide open with no restriction and the carb should be happy some where around 6-9. Bad gauge?
Thread Starter
|
In the Staging Lanes
Joined: Sep 2010
Posts: 79
67? First what range gauge do you have? 67 lbs would blow the needle off seat to the point of the vent tubes becoming fountains. 1-15lb gauge is all you need for a carb. Anything else is just going to be less accurate. Your pump is probably only making 14 wide open with no restriction and the carb should be happy some where around 6-9. Bad gauge?
Thread Starter
|
In the Staging Lanes
Joined: Sep 2010
Posts: 79
trunk id woes
now this needs alittle attention huh?
what ya think alittle puddy will cover it?
Uploaded with ImageShack.us
Uploaded with ImageShack.us
what ya think alittle puddy will cover it?
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by 75CAMAROLT; Oct 10, 2010 at 08:43 PM.
Thread Starter
|
In the Staging Lanes
Joined: Sep 2010
Posts: 79
Thanks already put the new trunk lid on.
Uploaded with ImageShack.us
Last edited by 75CAMAROLT; Oct 11, 2010 at 07:05 AM.
Thread Starter
|
In the Staging Lanes
Joined: Sep 2010
Posts: 79
ok got my cancel cam for my horn and now it goes off when i turn the wheel anybody know what could be wrong?
It's a tilt column thanks in advance.
John
Uploaded with ImageShack.us
It's a tilt column thanks in advance.
John
Uploaded with ImageShack.us
Thread
Thread Starter
Forum
Replies
Last Post
