LSD Carrier, what else is Needed for conversion w/ASR?

Reply Subscribe

Thread Tools

Search this Thread

#21

11-05-2010, 02:49 PM

libertyforall1776

Overdrive Member

Thread Starter

Join Date: Nov 2006

Location: IL

Posts: 4,042

Just look at your cods on the driver door side -- what is your GU code? i.e. GU5, GU6, etc.?

Quote:

Originally Posted by CamaroDreamer

Yea, idk the current gearing right now. I'll look it up later. It might be 3.42, but im not for sure. But if my gears are 3.42, all i need is the differential?

#22

11-05-2010, 02:50 PM

libertyforall1776

Overdrive Member

Thread Starter

Join Date: Nov 2006

Location: IL

Posts: 4,042

I recently had all the bearings replaced in my diff due to whirring noises last year, so I assume they should be good still?

Quote:

Originally Posted by Gorn

You need the install kit. You have to reset the gears to the new differential. You should go ahead and replace all the bearing while you are at it.

#23

11-05-2010, 11:42 PM

CamaroDreamer

1st Gear Member

Join Date: Apr 2010

Location: Evansville, IN

Posts: 121

Ok i will take a look at my codes. And thanks, i'll look at an install kit.

#24

11-07-2010, 01:48 PM

CamaroDreamer

1st Gear Member

Join Date: Apr 2010

Location: Evansville, IN

Posts: 121

yea its a gu5

#25

11-07-2010, 01:50 PM

CamaroDreamer

1st Gear Member

Join Date: Apr 2010

Location: Evansville, IN

Posts: 121

So 3.23 apparently

#26

11-07-2010, 01:54 PM

CamaroDreamer

1st Gear Member

Join Date: Apr 2010

Location: Evansville, IN

Posts: 121

So ive got my LSD, now does it have the gears already in it? If so, how do i find out what gearing it has in it?

#27

11-07-2010, 02:24 PM

craby

April 2011 ROTM

ROTM Winner's Club

Join Date: Mar 2009

Location: Tokeland, Washington

Posts: 21,749

where are the pictures? lol turn an axle hub/rotor 1 revolution and count the times the yoke turns, aprox 3 1/4 turn would be 323 aprox 3 1/2 turn would be 342. could do it the other way and see how many revolutions it takes on the yoke to get the rotor to turn once revolution. either way is good.