so i just replaced my clutch tob and pressure plate about 6000 miles ago and everything was fine... now i just noticed, that when i was in nuetral clutch engaged it makes a very slight grinind noise. like before but much much quieter. if i push in the clutch it goes away. ive only heard it this first time. this is my everyday driver for now but im not hard on it at all. other than occasionaly dumping the clutch from the revs getting stuck (working on finding out what that is) its never really romped on. is my pressure plate already going bad?! how?! or is this normal....

 

i would suspect the throw out bearing or pilot bushing/bearing.

 

agree with craby

 

you think itll have to be replaced again? ill pull it apart and look at it some time this week. what would cause my tob or pressure plate to go out so fast again?

 

faulty tob, not adjusted right, pilot bearing faulty or not changed when clutch was changed. do you ride (hold foot on peddle) the clutch when you drive?

 

no i dot ride the clutch i just let it neutral. if it wast adjusted correctly i will take it back to my old mechanic that installed it and see whats up. i helped install the entire thing so it looked right but i could be wrong.