95 lt1 stalling out in fog/mist
#11
Ya, I didn't have to replace the ignition coil or icm. If you get a noid lIght and check of ur injectors are getting grounded and firing that wOuld be a good test. I was able to see the injectors not getting signal. You are going to have to start trouble shooting the fuel and ignition system
#12
all those who remember changing breaker points and condensor raise your hands
all those who remember keeping a can of wire dry in the car raise your hands
the material used in wires has changed for the better but the one thing I don't see here is good ole basics.
replace your plug and coil wires and then come back and talk to us
all those who remember keeping a can of wire dry in the car raise your hands
the material used in wires has changed for the better but the one thing I don't see here is good ole basics.
replace your plug and coil wires and then come back and talk to us
Thread
Thread Starter
Forum
Replies
Last Post