Hey guys im doing my valve cover gaskets on my '94 v6 and im stuck on the back valve cover bolt (drivers side). Any ideas on how to reach that bolt? Theres very little clearance and I dont want to have to pull the engine just to do the gasket.

 

You should have plenty of room with the plenum off. You do have the plenum off, right? Cause you aren't taking the valve cover off without removing the plenum.

 

and the best way to get the plenum off is to drop the motor some... unless you have really small hands

 

Yeah I have the plenum off, but there is so little room behind the drivers side valve cover to get the bolt off. I was seeing if anyone had any tips or advice when they did their valve cover gaskets.