i have a 98 camaro 3800 series 2 i was driving it to work and the car died while driving. I had the ICM tested and it is good. i have no codes that would give me no spark and i dont believe that all 3 coil packs just went all at once. I need some help here

 

Start by checking fuses.

 

all fuses are good as well as the relays

 

i have been thinking Cam and/or crank sensor

 

According to the flow charts for testing "no spark", it points to either the ICM or crank sensor, if you know everything else is good.

 

well i had the ICM tested yesterday and it is good so i am going to try the crank sensor. is there a way to test the crank sensor also will that set a DTC code if so what?

 

anyone have an ignition wiring diagram?

 

ok so i have isolated the issue there is a pink wire that runs into the fuse block under the hood with a 15a fuse labeled eng control i jump the wire and the car starts but i am getting no power if i dont jump it. the haynes manual i have is not giving me specfics on the wire casue there are several pink wires anyone have a better diagram of this ip fuse block?

 

Is the 15a fuse blown? Not sure about posting wiring diag due to copy write issues these days.