The way things were strewn about, it looks like a work in progress.
Yes, you too can make your very own CAI, with a little smart shopping at your local Home Dopey store.
Plumbing and heating supplies aren't only for your home any more.

 

Help on the original topic would be awesome! Thanks

 

Sheesh, what a grouch!!!
For reference, once upon a time I had 94 3.4 with a K&N CAI setup. When I sold the 94, I kept the K&N and put it on the 96 Z28 that I bought in it's place (it was a tough trade-off, but I lived with it). I did have to do a little creative fitting on the rubber boot part, but the rest of it fit in place the same between the two cars. So it wouldn't be quite right to say that an elbow isn't made for your 3.4.

 

That so called "Trailer trash" car is Tiagos car from Force Fed Fabrications. I used a build pic for reference. The car made 336 horsepower and 397 ft/lb tq on stock internals and 10 psi. So don't go talking crap if you don't know what your talking about. Heres the dyno vid
http://www.youtube.com/watch?v=EaqYdpgV4oA

 

That's sick. How the hell do you run 10lbs of boost on a 3.4 with stock internals? It'll blow sky high.

 

Tuning, very carefully

 

I wanna do that to mine!!!!!!

 

i find 10lbs of boost on a stock 3.4 VERY hard to believe even with a very careful tune

 

OK so I knew all about this car and who built it. To me the loose wires or hoses everywhere and the half built engine looked like **** My opinion, simple as that so get our panties out of a bunch. Props and much respect to the car in the video and Wow! That power is hard to pull out of a 3.8L let alone a 3.4L.

Massey

 

I have a question for you. Where did you have the lt1 throttle body adaptor made? And did you design it yourself? If so, do you still have the specs? I have the same parts but I am lacking the adapter. Can you contact me via email at sgtyasika111@live.com? Thanks