pasanger side window problem
#1
![Default](https://camaroforums.com/forum/images/icons/icon1.gif)
My window started to nreak down after i pressed to open it and my gf at the same time now the window rolls down but when i press for it to roll up it goes up a little but after it dose i have to wait about 4-6 minutes to go up another bit what might be causing this?
#3
![Default](https://camaroforums.com/forum/images/icons/icon1.gif)
Time for a window motor. If you never replaced one, read the below link first. It includes pics of "how to"
http://shbox.com/page/windowmotor.html
http://shbox.com/page/windowmotor.html
#9
![Default](https://camaroforums.com/forum/images/icons/icon1.gif)
Still confused by the GF thing but ok... Now as for the window motor issue:
What is happening is the circuit breaker is being tripped and it takes a few mins to cool off and reset. This happen from a weak motor, binding regulator, binding tracks, or a combo of 2 or more of the issues. Chances if you had any binding then you have already fried the motor and will need to replace it. I recomend paying a little extra and getting the full motor and regulator unit. When you put the stuff back together make sure you grease the tracks again and get them good so the regulator slides through them really smooth.
Massey
What is happening is the circuit breaker is being tripped and it takes a few mins to cool off and reset. This happen from a weak motor, binding regulator, binding tracks, or a combo of 2 or more of the issues. Chances if you had any binding then you have already fried the motor and will need to replace it. I recomend paying a little extra and getting the full motor and regulator unit. When you put the stuff back together make sure you grease the tracks again and get them good so the regulator slides through them really smooth.
Massey