95 Camaro power window failure
Thread Starter
|
Newbie
Joined: Dec 2008
Posts: 9
From: Darlington,England
Window snag update
Good news! Tried window on the way to work this morning and hey presto - it worked like it never had had a problem!
No idea why it works now or why it packed in, but what the hell, its fixed - yipee! At least I hadn't got down to taking the door apart!! Maybe it was the cold jamming the motor or upsetting the thermal link? Maybe we'll never know until it happens again (hope not).
Thanx for all of your advice and inputs. Here's to the next problem!
Cheers.
Phil UK
No idea why it works now or why it packed in, but what the hell, its fixed - yipee! At least I hadn't got down to taking the door apart!! Maybe it was the cold jamming the motor or upsetting the thermal link? Maybe we'll never know until it happens again (hope not).
Thanx for all of your advice and inputs. Here's to the next problem!
Cheers.
Phil UK
Newbie
Joined: May 2009
Posts: 1
more window help!!!!
The windows are big and heavy so it puts a pretty decent amount of strain on the window motor. That said, the lubrication in the internal track the window slides up also has a tendency to dry up and become sticky-ish, which puts additional strain on an already strained motor. My window motor hasn't quit yet, but it did snap off the guide that fits into the track (I had to weld it back in for a quick fix...).
Newbie
Joined: Oct 2011
Posts: 5
Hello everyone,
I just joined the Camaro forum today. I was searching the web for info on window motor replacement and found this forum. Judging by the responses given to Phil_UK, there seems to be a wealth of knowledge among the members here.
Here is my situation.
I bought a 1995 Camaro a week ago. 3.4L v6 5-speed manual. Great shape 105k miles.
The drivers side window has been slow going up since I got it last week, and occasionally it would stop on the Auto-down process.
This hasn't been a big deal, as they still worked, but yesterday, while rolling the window up, it stopped. I released the stitch and pressed it again, and it didn't move, and some smoke came out of the door. I pressed the down button, and it rolled down.
I tried up again, and it began rolling up, and then stopped again and a little smoke out again. I was able to get the window up by getting out of the car and physically pulling the window up as I pressed the button.
Here is my question, could it be the motor, or the regulator, or both?
Your thoughts and replys are greatly appreciated.
I just joined the Camaro forum today. I was searching the web for info on window motor replacement and found this forum. Judging by the responses given to Phil_UK, there seems to be a wealth of knowledge among the members here.
Here is my situation.
I bought a 1995 Camaro a week ago. 3.4L v6 5-speed manual. Great shape 105k miles.
The drivers side window has been slow going up since I got it last week, and occasionally it would stop on the Auto-down process.
This hasn't been a big deal, as they still worked, but yesterday, while rolling the window up, it stopped. I released the stitch and pressed it again, and it didn't move, and some smoke came out of the door. I pressed the down button, and it rolled down.
I tried up again, and it began rolling up, and then stopped again and a little smoke out again. I was able to get the window up by getting out of the car and physically pulling the window up as I pressed the button.
Here is my question, could it be the motor, or the regulator, or both?
Your thoughts and replys are greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
