problems with my choke....i think

Old Oct 14, 2008 | 11:41 PM
  #1  
JakeHall's Avatar
Thread Starter
|
Newbie
Joined: Oct 2008
Posts: 3
From:
Default problems with my choke....i think

i got an 83 camaro Z28, i have the idle set pretty high for now, its at like 1200, but after driving a while if i slow down at a light or a stopsign, the rpms go way down and its wants to shut off on me..ive had this happen too many times now and im gettin frustrated..i heard i might be the choke doing this,,but how do i go about ajusting it or whatever??
 
Old Oct 15, 2008 | 04:05 AM
  #2  
MadMikeZ28's Avatar
Overdrive Member
Joined: Jul 2006
Posts: 4,248
From:
Default RE: problems with my choke....i think

Have you check to see if your choke is working and opening fully? You might just need to properly adjust your carb and timing. Check and make sure the choke opens fully and linkage works freely and there are no vacuum leaks.
 
Old Oct 15, 2008 | 08:08 AM
  #3  
Camaro 69's Avatar
Senior Moderator
January 2010 ROTM Winner
Joined: Oct 2007
Posts: 18,306
From: The 'Burbs of Chicago
Default RE: problems with my choke....i think

Your fast idle is because of your fast idle screw adjustment on the choke linkage. But 1200 rpm really isn't too high for a cold engine. As the engine warms up, the choke linkage cam rotates and the fast idle screw steps down to the lower pawls of the choke cam. That's why the idle drops down on you after driving it a while. Then the throttle linkage (on drivers side of carb) drops down and should rest on the curb idle screw. With the engine warm, check your idle screw at the front corner of the drivers side of the carb, and turn it in clockwise until you get it to the rpm's you want.
Read this, choke info starts on page 18: Quadrajet Carb Manual
 
Old Oct 15, 2008 | 08:29 AM
  #4  
JakeHall's Avatar
Thread Starter
|
Newbie
Joined: Oct 2008
Posts: 3
From:
Default RE: problems with my choke....i think

thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sebi1990
93-02 General
16
Oct 19, 2010 12:01 PM
kolski
82-92 V8 Tech
1
Aug 1, 2009 11:05 PM
cef2lion
67-69 General
10
May 18, 2007 01:45 PM
camarorz28
LT1/LT4 Tech
19
Dec 23, 2006 06:20 PM
mikeatwo
General Tech
2
Oct 3, 2006 08:27 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:08 AM.