Searched around but cant seem to find a solution to replacing the reverse lockout solenoid. Issue came up when I scanned the check engine light a while back. Any pics would also help dramatically too! Thnx

P.s. my car is a 2000 z28 M6 if that helps.

 

Well I can tell you where it is but I will not be able to post pictures of the thing till later if you still need them. It is on the rear of the trans at the top of the left side (driver's side) You will see 2 plugs the lower and forward most one is the speed sensor and the upper one near the rear of the trans is the lockout solenoid. One bolt holds it in. I dont know what else has to be removed to gain access but I am going to guess you may have to take the torque arm out of the way.

Massey

 

Kuyayan,
I have a photo of the solenoid (PDF format so you can easily open it) but it won't let me attach anything. not sure why. If you send me a message and your email I'll shoot it over for you.

 

Thnx for the help guys. Ill try to work on my car in the coming weeks i.e. winterize, preventive maintenance, and hopefully get this problem solved. Thnx again

 

kuyayan,
I just emailed you a photo of that solenoid. Let me know if you get it.