Newbe needs help with TPI connections
Thread Starter
|
Newbie
Joined: Sep 2006
Posts: 1
From:
Newbe needs help with TPI connections
Hey guys,
I am one of the new guys on the block.I need your expertise. I am almost finished putting back together my sons 87 Iroc 305 TPI. My problem is he never labeled any of the connections that connect to the the TPI. I am a little lost. Can someone direct me to a web site or draw me a dummy proof sketch. It would be greatly appreciated.
Thanks.
I am one of the new guys on the block.I need your expertise. I am almost finished putting back together my sons 87 Iroc 305 TPI. My problem is he never labeled any of the connections that connect to the the TPI. I am a little lost. Can someone direct me to a web site or draw me a dummy proof sketch. It would be greatly appreciated.
Thanks.
1st Gear Member
Joined: Aug 2006
Posts: 256
From:
RE: Newbe needs help with TPI connections
I am ***-u-ming you mean just the injector harness itself. For the fuel injectors? One of the stupid ideas is they used the same color wires for the left/right bank of injectors. So it is easy to mismatch them.
If so the driver side bank, cyl 1,3,5,7 the two wires are Light Blue and Pink with a Black tracer.
Passenger side bank cyl 2,4,6,8 is Light Green and Pink with a Black tracer.
Hope this helps.
If so the driver side bank, cyl 1,3,5,7 the two wires are Light Blue and Pink with a Black tracer.
Passenger side bank cyl 2,4,6,8 is Light Green and Pink with a Black tracer.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
