carburator issues
#1
carburator issues
i was just wondering witch would be a better performance carb for my 355sbc. it is built for a 700-750cfm easy i was just wondering what kind to use some say the double pumper, street avenger or even the edelbrock performer. economy is not a big concern so any input would be appreicated
#2
RE: carburator issues
Holleys are pretty safe if You leave them alone. A Double pumper is going to give Yoy gas when You want it, the rest rely on the ennine vacuum for secondary blabes to open. Go from there.
#6
RE: carburator issues
my body is stock and the whole set up is holley systamax II kit with aluminam heads, street dominator intake, roler rockers, forged crank, eagle rods , forged dome pistons, lunati cam .290/.297 dur .490/.490 lift 110degrees lobe seperation, b&m th350 with 2800rpm stall, 3.42 eaton posi, 26in tall indy profile ss,msd ignition system with hei distrbutor 10.7-1cpr. at idle i only pull around 10in of vacuum. and also what kind of power do you think it will make
#8
RE: carburator issues
Is this a street racer or a track only racer....
are you running a rev limiter.....
street racer ... Edelbrock 1812 800 CFM... manual choke
track ... holley 800 sqaure bore.....since it's an auto, I'd run a vacum secondary, tuned right it'll do ya good,
are you running a rev limiter.....
street racer ... Edelbrock 1812 800 CFM... manual choke
track ... holley 800 sqaure bore.....since it's an auto, I'd run a vacum secondary, tuned right it'll do ya good,