Project hit a roadblock...need some help SOON
#1
Project hit a roadblock...need some help SOON
Ok, so we're swapping a 3.4L from a 95 into the body from a 96 Z28. We got the motor/transmission out this weekend easy enough, and we were just about to put them into the Z body, but then we realized we had a slight problem. The bolt holes for the engine mounts aren't the same. We have the ones from the Z still, and I think we should be able to use one of them, but I don't know for sure. And the other one I doubt we'll be able to use at all.
I want to get this car on the road before I go back to school, so we can't afford any major delays. I NEED HELP SOON! thanks
I want to get this car on the road before I go back to school, so we can't afford any major delays. I NEED HELP SOON! thanks
#4
This is correct. I did a swap for my buddy in HS. He got a 3.4 with a **** body and we were switching it into a 96 Z body and we had to swap out the K member. Drivetrain won't line up
#7
dont forget about the OBD II system. it switch in the 95's.
#8
forgive me if I sound stupid, but what is that? we are already switching the entire wiring harness.
One more thing: could we get away with welding the base of the engine mount to the k-member? My dad's a pretty good welder, so he could probably do it.
One more thing: could we get away with welding the base of the engine mount to the k-member? My dad's a pretty good welder, so he could probably do it.