1/4 mile speed and time guess`s
#1
1/4 mile speed and time guess`s
i just rebuilt my 94 3.4 block cooked built ground up and once it gets nice here in central PA ill be taking it to the local strip but i was just looking to see what people are thinking it will do there here is what im running
30 over K.B. pistons/rings
comp cams k kit
Port and polished Heads
pacesetter headers
MSD ignition box/ interfaces/coil packs
19lbs injectors
adj fuel pre. reg
K&N short ram induction
all new bearings
for tires i got a set of yokohama avs e1000 245/50zr with few miles on them
i haven't re-geared it at all only a mini spool in the diff
if you got any ideas id like to know
30 over K.B. pistons/rings
comp cams k kit
- Duration (Intake/Exhaust): 212°/212° @ .050"
- Valve Lift (w/1.5 Rocker): .440"/.440"
- Lobe Step. Angle: 110°
Port and polished Heads
pacesetter headers
MSD ignition box/ interfaces/coil packs
19lbs injectors
adj fuel pre. reg
K&N short ram induction
all new bearings
for tires i got a set of yokohama avs e1000 245/50zr with few miles on them
i haven't re-geared it at all only a mini spool in the diff
if you got any ideas id like to know
#6
Bet he meant rockers!
In stock form, his was a 16.6 sec. 1/4 mile car, and the Z28 was 14.2 sec. I'm thinking he's somewhere between the mid to upper 15's.
In stock form, his was a 16.6 sec. 1/4 mile car, and the Z28 was 14.2 sec. I'm thinking he's somewhere between the mid to upper 15's.
#7
yeah i do but what about the connection from the ipod to car
#9
I only ran a 16.3 @83 mph with my car. I also have 3.42's and he probably has 2.73s. Given my trans is stock and not rebuilt with 207k I could do better. I would say he would run low 16s.
Also they are 1.6 roller rockers, not push rods.
Also they are 1.6 roller rockers, not push rods.