Project 96

Thread Tools
 
Search this Thread
 
  #1  
Old 10-14-2008, 07:44 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,353
Default Project 96

I got her home today. Its going to be a bit of work. This car is in a lot better shape then many I looked at. It has what sounds like a main and a rod bearing out. V6 5 speed and those are leaves on the hood. I can find no rust on it. There is a crack in one of the fenders.


Name:  96cam1.jpg
Views: 803
Size:  32.3 KB

Name:  96cam3.jpg
Views: 333
Size:  38.2 KB
Interior is very nice concidering its 12 years old
Name:  96cam2.jpg
Views: 324
Size:  21.4 KB

Step one will be to pull the motor. I hope to atlease start that this weekend. Since I could not find a good how to thread on pulling the motor this may become one of those.
 
  #2  
Old 10-14-2008, 08:02 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,353
Default RE: Project 96

Removed
 
  #3  
Old 10-20-2008, 10:03 PM
Saint_Ali's Avatar
Overdrive Member
Join Date: Jun 2006
Location: Las Vegas
Posts: 3,170
Default RE: Project 96

very nice car, you cant beat a 5sp and t tops, i say rebuild the engine, it will be cheaper to do and better, i wouldnt trust a used engine you never know how it was driven and taken care of
 
  #4  
Old 10-20-2008, 10:26 PM
ninetysixyenko's Avatar
4th Gear Member
Join Date: May 2007
Location:
Posts: 2,103
Default RE: Project 96

looks nice, reminds me of my old 96.
 
  #5  
Old 10-22-2008, 11:05 AM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,353
Default RE: Project 96

I was going to rebuild but it looks like one main spun and a rod streched out and smacked the head. So If i would rebuild it the cost would be more then a remanufacture engine. I found a used 2002 with 29K on it for $600. They are going to throw in all the bolt on stuff. Starter, alternator etc. and a warranty on the long block. I figurehaving all those bolt-on 6 years and 100K newer would be nice.
 
  #6  
Old 10-22-2008, 12:31 PM
ninetysixyenko's Avatar
4th Gear Member
Join Date: May 2007
Location:
Posts: 2,103
Default RE: Project 96

thats a awesome deal on the engine....
when i looked at a engine for mine, it was gonna be close to 3k.
 
  #7  
Old 10-22-2008, 12:57 PM
02StanGT's Avatar
Overdrive Member
Join Date: Sep 2005
Location: Granbury, TX
Posts: 4,053
Default RE: Project 96

That is a good deal.
 
  #8  
Old 10-22-2008, 02:32 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,353
Default RE: Project 96

I only paid 1K for the car in the above picture. I think it has been garage keep and dealer serviced car that was owned by a middle aged lady who was really pissed at her boy friend. Seems she let him drive the car one night and he blew the motor. She made the comment when I paid her that at least I will not have to worry about the tops leaking. In the beginning of the summer the dealership replace all the t-top weather striping and the tops themselves if I understood her right. She said it cost her more then she got for the car

With a little luck I will have a decent ride for under 2K. Not even my wife can complain about that.
 
  #9  
Old 11-23-2008, 02:41 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,353
Default RE: Project 96

Well I am knee deep in it now. Pulling the motor out of the bottom turned out of be a bit of a challange with no lift and a 1-1/2 cargarage. I am hoping my 20023.8 (50K) will be here for the long weekend.

I am having a little trouble staying in budget. I assumed $200 for beer expenses. Thats about gone and I just got the motor out. Oh well sometimes these things just can't be budgeted.

Name:  Pulled_out.jpg
Views: 316
Size:  41.9 KB

Name:  pull_Out2.jpg
Views: 291
Size:  43.8 KB
 
  #10  
Old 11-23-2008, 04:02 PM
whammer3024's Avatar
ROTM Winner
ROTM Winner's Club
Join Date: May 2007
Posts: 2,222
Default RE: Project 96

wow...you must be able to take em down! haha. looks like you're in for some fun! nice car though man
 


Quick Reply: Project 96



All times are GMT -5. The time now is 01:07 PM.