Another z28 wont start issue.

Old Jul 13, 2012 | 05:57 PM
  #31  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

I feel like its that damn connected in the left rear wheel well that connects the lines
 
Old Jul 13, 2012 | 05:58 PM
  #32  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

Connector*. The prongs in there wiggle a lot.
 
Old Jul 13, 2012 | 06:12 PM
  #33  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,015
From: Tokeland, Washington
ROTM Winner's Club
Default

yes it could be in the theft deterrent module or the bcm. look here http://shbox.com/1/pass_key.jpg i see a dark blue wire coming from the tdm to the bcm if its getting power in that wire its would lead to the bcm http://shbox.com/1/pass_key.jpg where a dark blue wire come from there to the pcm (main computer) where it comes out to the fuel pump relay with dark green and white wire and a black and white wire from the fuel pump relay the grey wire goes to the fuel pump. check to see if the grey wire from the relay has power when you first turn the key on.
 
Old Jul 13, 2012 | 06:21 PM
  #34  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

Kk, give me a little
 
Old Jul 13, 2012 | 07:29 PM
  #35  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

Went to relay and Poked the grey wire and got 12.7 v and no pressure !
 
Old Jul 13, 2012 | 07:45 PM
  #36  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

That grey wire meets up with the sending unit wire where?
 
Old Jul 13, 2012 | 08:25 PM
  #37  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,015
From: Tokeland, Washington
ROTM Winner's Club
Default

should go all the way back to the fuel pump 4th Gen LT1 F-body Tech Articles
 
Old Jul 13, 2012 | 11:24 PM
  #38  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

****s acting up lOl
 
Old Jul 13, 2012 | 11:25 PM
  #39  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

I'll figure it out, I'll take the whole engine Out!
 
Old Jul 13, 2012 | 11:27 PM
  #40  
Greg08's Avatar
Thread Starter
|
2nd Gear member
Joined: Jan 2012
Posts: 395
Default

How would I get to that connect
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:15 PM.