What is the casting number on the heads?

 

idk i havent got them yet not till friday was thaat the block id?

 

I say your 350's power output is just fine right where it is supposed to be at for what it is.
Why pay $5000 dollars for something you already got? Why trust a shop?Ahhh, nah too much work to check better pay somebody $5000- Hey I know, you can pay me and I'll build you a 480hp street engine small block for real. Hey if a guy told me he sold me a 383 and it put 220hp and 240tq to the rear wheels I would have said hey this is a 350 man... huge difference. So, did you have deck added to your block? 1.560" piston with 1.875" half stroke with 5.7" pink rod = 9.135" thats 0.11" out the top of block ... wow. Now lets see with a 350, yup it equals = 9" exactly thats why we deck the block to top of pistons in 4 corners to be level with the pistons and to get quench area to gasket thickness because it keeps the heat out of the top of piston and rings and into the exhaust where it should go after its done. So decked block, .039" compressed thickness/ .060"-bore gasket, (still 4" bore block) 64cc vortec heads already setup, = 10.27:1 compression with excellent quench distance, now need XR282HR cam and done. 8.06:1 Dynamic compression. check valve to piston/ cut your reliefs and bam,Here's your 400hp, probably needs the 670+cfm now. Engine fixed and works with your intake and gears. that'll be $5000. dollars please lol , Peace.

 

ok i dont know much about engines and im not the fastest learner so u kinda was speaking japanese to me so if u can put it in a form a dumbass can understand maybe i can figure this out then haha

 

i think im gonna throw on a 670 holly street avenger should be plenty enough

 

and was gonna buy a new motor for it so i will know what i have in it and take that motor and throw it in my dads truck that is a 305 vortec truck so that can pull stuff a lil better had a hard time pulling that camaro up hill i trailored it home

 

Hmmm, are you going to keep the 600? who knows, the 600cfm may work better for now.

Well if you want an engine I will build you one at cost with a tip for me. Just let me know, I can budget blueprint specification you a great pump gas street engine that works with your gearing and car.

 

im not gonna build a motor that is to damn difficult for my skill i can do alot to a car just not that and i have no place to build my garage is full of **** and cars

 

What I meant was if you want me to build one for you and send in crate I can.
Will you pm me so I can see if my pm works?

 

finally got the choke fixed so it will run now