what do you think of these heads?
#1
![Default](https://camaroforums.com/forum/images/icons/icon1.gif)
hey guys, i've been looking around for a set of heads for my 355 and this is what i've found: http://cgi.ebay.com/ebaymotors/PERFO...Q5fAccessories
as for details on the motor, its a 355, edelbrock performer intake, 600cfm holley 4bbl carb, as for the cam i'm still looking any suggestions would be great! thanks!
as for details on the motor, its a 355, edelbrock performer intake, 600cfm holley 4bbl carb, as for the cam i'm still looking any suggestions would be great! thanks!
#5
![Default](https://camaroforums.com/forum/images/icons/icon1.gif)
I'd just go with something that's got a reasonable idle and mid range power,many guys over cam their cars with poor results.
With the dual plane performer intake and 600 carb it's a mild performance parts package so far anyway,the iron 2.02 heads are nice but not over the top so they should work well with that intake/carb and a nice mild hydraulic flat tappet cam and lifters.
Something like this will work great giving you lots of low end and mid range power right where you want it with a street driven car.
http://www.summitracing.com/parts/SUM-K00052/
With the dual plane performer intake and 600 carb it's a mild performance parts package so far anyway,the iron 2.02 heads are nice but not over the top so they should work well with that intake/carb and a nice mild hydraulic flat tappet cam and lifters.
Something like this will work great giving you lots of low end and mid range power right where you want it with a street driven car.
http://www.summitracing.com/parts/SUM-K00052/
Thread
Thread Starter
Forum
Replies
Last Post
kuhlman187
67-69 V8 Tech
4
02-12-2015 08:14 AM