hey guys, i've been looking around for a set of heads for my 355 and this is what i've found: http://cgi.ebay.com/ebaymotors/PERFO...Q5fAccessories

as for details on the motor, its a 355, edelbrock performer intake, 600cfm holley 4bbl carb, as for the cam i'm still looking any suggestions would be great! thanks!

 

2.02's with a pocket port done for under $400,looks like a good deal to me.

 

Stick shift or auto?...if auto stock stall or what?

 

its auto...im assuming the stall in it is stock but if i had to i could get a new one depending on what would be required

 

I'd just go with something that's got a reasonable idle and mid range power,many guys over cam their cars with poor results.
With the dual plane performer intake and 600 carb it's a mild performance parts package so far anyway,the iron 2.02 heads are nice but not over the top so they should work well with that intake/carb and a nice mild hydraulic flat tappet cam and lifters.

Something like this will work great giving you lots of low end and mid range power right where you want it with a street driven car.

http://www.summitracing.com/parts/SUM-K00052/

 

alright....thanks a ton for the advice! i'll be looking into this and hopefully getting rolling on this project, thanks