suspension
Thread Starter
|
In the Staging Lanes
Joined: Nov 2007
Posts: 60
From:
suspension
1968 camaro front springs have the car setting 3 in above tire
i assume the disc front end is from a 69
the car does not look or drive right
i bought the car the same way i cut 1 coil and it looked good and drove fine but i do not want to change front rims to a diferent off set every bump the wheel rubs the fender
bought new springs for a 69 with 350 w a/c and ist the same before i started
hhhhhhhhhhhhelp please
i assume the disc front end is from a 69
the car does not look or drive right
i bought the car the same way i cut 1 coil and it looked good and drove fine but i do not want to change front rims to a diferent off set every bump the wheel rubs the fender
bought new springs for a 69 with 350 w a/c and ist the same before i started
hhhhhhhhhhhhelp please
In the Staging Lanes
Joined: Oct 2007
Posts: 36
From: central arkansas
RE: suspension
look at your old springs that are a little to low, and your new springs that are to high. Put them side by side and cut them longer than the ones you already cut. dont cut them to short because you can always cut some more off later.
Thread
Thread Starter
Forum
Replies
Last Post