VS Cars going head to head!

what do i need to beat a ls1?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-20-2006, 02:04 AM
blainemyers's Avatar
Newbie
Thread Starter
Join Date: Aug 2006
Posts: 2
Default what do i need to beat a ls1?

i have a 94 lt1, 6 speed with l-t headers, x-pipe, airfoil, cai and i want to beat my friends ls1 trans am that is a auto and stock. we have not raced yet. what do you think i will need? thanks
 
  #2  
Old 08-20-2006, 02:12 AM
Saint_Ali's Avatar
Overdrive Member
Join Date: Jun 2006
Location: Las Vegas
Posts: 3,170
Default RE: what do i need to beat a ls1?

well the headers and cai help you out but i think that the trans am having the ls1 might still have an advantage over you plus its an auto so it could be quicker off the line its hard to say
 
  #3  
Old 08-20-2006, 02:27 AM
JD1969's Avatar
4th Gear Member
Join Date: Jun 2005
Posts: 1,687
Default RE: what do i need to beat a ls1?

You will need some pretty serious mods. Stock for stock the two cars are nearly a full second apart. You will need a cam swap or a good shot of nitrous and then you need to hook it up with a set of drag radials.
 
  #4  
Old 08-20-2006, 05:00 AM
frankthetank078's Avatar
In the Staging Lanes
Join Date: Mar 2006
Location:
Posts: 44
Default RE: what do i need to beat a ls1?

i agree to disagree with headers and CAI intake i think you should have him by a little...since his transmission is stock he wont have an advantage over you...just shift threw your gears well and ull be fine
 
  #5  
Old 08-20-2006, 09:33 AM
JD1969's Avatar
4th Gear Member
Join Date: Jun 2005
Posts: 1,687
Default RE: what do i need to beat a ls1?

How will that make up fpr the fact that a stock LS1 will run low 13's? Headers and a CAI will not drop more than .5 off his 1/4 mile time. Unless the LS1 spins really bad I still say he needs more mods.
 
  #6  
Old 08-20-2006, 03:34 PM
frankthetank078's Avatar
In the Staging Lanes
Join Date: Mar 2006
Location:
Posts: 44
Default RE: what do i need to beat a ls1?

that is with a professional driver though and seeing how the LS1 is auto and completely stock he probably doesnt no how to launch it the best or take advantage of his automatic...look how much HP he will be making compared to the stock LS1
 
  #7  
Old 08-20-2006, 07:33 PM
auSStin's Avatar
1st Gear Member
Join Date: Apr 2006
Location: Cincinnati
Posts: 134
Default RE: what do i need to beat a ls1?

why do people always **** on automatics???
 
  #8  
Old 08-21-2006, 01:26 AM
JD1969's Avatar
4th Gear Member
Join Date: Jun 2005
Posts: 1,687
Default RE: what do i need to beat a ls1?


ORIGINAL: auSStin

why do people always **** on automatics???
Because they are cluless. My stalled auto outperforms sticks with twice the amount of money and work in them and my car is generally faster than most stick cars. Personally I think it's funny when people put down autos, it shows how dumb they are and I like to let people think my car is slow and then lay the smack down on them.
 
  #9  
Old 08-21-2006, 08:46 AM
frankthetank078's Avatar
In the Staging Lanes
Join Date: Mar 2006
Location:
Posts: 44
Default RE: what do i need to beat a ls1?

i wasnet putting down automatics...i have a well built 700r4 with a stall and tell MANY kids that have 5 and 6 speeds that my auto is faster then theres and have started a thread or two about the subject just not in this forum. All im saying is that if he floors the gas and just spins from the line that, that is going to make it worse for him but if he knew how to properly launch it then the LS1 would be fine
 
  #10  
Old 08-21-2006, 03:53 PM
TommyV8's Avatar
Newbie
Join Date: Mar 2006
Location:
Posts: 9
Default RE: what do i need to beat a ls1?

A stock auto LS1 should run anywhere from 13.2 (rare) to 13.7, depending on gears, roof, and model year. Usually around 13.5, which is what mine ran (13.52 @ 104). My g/f ran 13.36 @ 105 with a stock 2.73-geared hardtop and a 2.0 60 ft. Hope this helps.
 


Quick Reply: what do i need to beat a ls1?



All times are GMT -5. The time now is 12:20 PM.