Newb to turbos
#1
04-23-2008, 09:49 PM
Newb to turbos
Could i turbo my 89 rs 5.0L???? http://i174.photobucket.com/albums/w...Camarorims.jpg
and
Where would i be able to find like a kit or sumthing for it?
and
Where would i be able to find like a kit or sumthing for it?
#2
04-23-2008, 11:32 PM
RE: Newb to turbos
you could, but not much. the 305 really wasnt made to produce alot of power. i dont know the exact number but it wont take much boost to pop that motor like a baloon. you would be better off doing some boltons and a cam for some more power.
a kit is probably going to be hard to find. you may have to have it custom made, and there are some fabrication companies out there but it will be spendy.
a kit is probably going to be hard to find. you may have to have it custom made, and there are some fabrication companies out there but it will be spendy.
#3
04-24-2008, 03:59 PM
RE: Newb to turbos
oh alright and i wasnt planning on puttin a big turbo just like 5lb boost
but alright an im installing a cam later in a month or so
but alright an im installing a cam later in a month or so
#4
05-30-2008, 04:35 AM
RE: Newb to turbos
a kit your not going to find... but i would be glad to help you with the steps to turbo it... since it's a 305 and really wasn't meant to hold alot of pressure i would do this for a decent sized power increase... buy you something along the lines of a 25mm trim turbo, a short header for 1 side of the motor or the other, mount the turbo and the bit of acc. that go with it and you've got easy 10psi boost from a single turbo with very little work if interested further send me a message i've been boosting engines for a while now whether it's a domestic or import i'm a self proclaimed boost *can't say g word*
#5
06-28-2008, 12:08 AM
RE: Newb to turbos
ORIGINAL: stroker383
a kit your not going to find... but i would be glad to help you with the steps to turbo it... since it's a 305 and really wasn't meant to hold alot of pressure i would do this for a decent sized power increase... buy you something along the lines of a 25mm trim turbo, a short header for 1 side of the motor or the other, mount the turbo and the bit of acc. that go with it and you've got easy 10psi boost from a single turbo with very little work if interested further send me a message i've been boosting engines for a while now whether it's a domestic or import i'm a self proclaimed boost *can't say g word*
a kit your not going to find... but i would be glad to help you with the steps to turbo it... since it's a 305 and really wasn't meant to hold alot of pressure i would do this for a decent sized power increase... buy you something along the lines of a 25mm trim turbo, a short header for 1 side of the motor or the other, mount the turbo and the bit of acc. that go with it and you've got easy 10psi boost from a single turbo with very little work if interested further send me a message i've been boosting engines for a while now whether it's a domestic or import i'm a self proclaimed boost *can't say g word*
http://cgi.ebay.com/ebaymotors/84-93...spagenameZWDVW
Thread
Thread Starter
Forum
Replies
Last Post