I have 36lbs Accel injectors and I was thinking of replacing. I found some but I dont know if they will work, what is a HIGH IMPEDAMCE AND FOUR HOLES injector. Im really thinking i have some bad ones on the driver side since it floods on 1 side only.

 

take em out and send or take them to a injector shop to be cleaned and flow tested. that way you will know if any are bad and causing or adding to the issue.

 

all i know about high impedance injectors is that the resistance of the injector as higher (12ohms) and the low impedance are around 2-3ohms and require a resistor pack to keep from burning out

and the 4 hole injectors have 4 output holes its supposed to help atomize the fuel better by causing a finer mist

 

Oh that helps...i assume that what mine are, considering i see not resistor pack.

I wish i knew somewhere to send mine. No place close that i know off.


Im just thinking, I have a friend with a set of 24lbs injectors, what if I put those in....wil have to retune it for those.

 

i have racetronix 37lb

 

Youre running them now? Did you have to tune for them?

 

any change in lb/hr injectors you will need a tune. i would run 30lb injectors in a 383 minimum.

 

what city you in

 

Im in seneca, SC.

 

man your right, your in a bad place for injector shops. one in georgia About Us - Fuel Injector Connection