Is 600 cfm enough for my motor?
Thread Starter
|
In the Staging Lanes
Joined: Apr 2011
Posts: 68
From: Ontario,Canada
Is 600 cfm enough for my motor?
just bought a edelbrock performer dual plane intake and a 4010 Holley 600cfm carb for a 100 bucks.
The intake is a keeper but the 4bbl 600 cfm carb is that enough for my sbc 350 .020 over with 10:1 compression and a cam with .518 int. and .525 exh. lift?
The intake is a keeper but the 4bbl 600 cfm carb is that enough for my sbc 350 .020 over with 10:1 compression and a cam with .518 int. and .525 exh. lift?
Thread Starter
|
In the Staging Lanes
Joined: Apr 2011
Posts: 68
From: Ontario,Canada
350 heads from a mid 70's camaro, 68cc combustion chambers, stepped down neck Manley valves and 1.95 int with 1.6 exh valves, bee hive springs, teflon seals, titanium retainers and locks, extensive port matching polishing the exhaust ports and cleaning the intake runners and full roller rockers.
Thread
Thread Starter
Forum
Replies
Last Post
