93-02 V6 Tech V6 Camaro General Topics.

Need Help Car Won't Start/Stalls

Old Jan 27, 2010 | 09:17 AM
  #1  
'85_Tribute's Avatar
Thread Starter
|
Newbie
Joined: Jan 2010
Posts: 2
Exclamation Need Help Car Won't Start/Stalls

Hello all, I need a bit of help, my brother's V6 auto 02 Camaro stalled out the other day as he was accelerating from a stop, it took a while to start it and once he did it was running sluggish. Then last night, it threw a code for the O2 sensor, then it wouldn't start. This morning it started and he was driving to my house when it stalled out again. The low oil light also came on but when he checked the dip stick the line was where it should be. The car just hit 70,000 miles and was about to get an oil change today. Any Ideas what's going on?
 
Old Jan 27, 2010 | 10:23 AM
  #2  
jwoo122's Avatar
Newbie
Joined: Jan 2010
Posts: 7
Post

Well, i had the same problem with the low oil light comming on like last week. and i replaced the oil leveling sensor yesterday, and everything is back to being normal. so check to make sure the sensor on the side of the oil pan is working properly. as for the car stalling all the time... im sorry but i have no idea what that could be.
 
Old Jan 27, 2010 | 04:26 PM
  #3  
Tonylig928's Avatar
In the Staging Lanes
Joined: Apr 2009
Posts: 94
From: New York
Default

i would check some things like the fuel pump, and check the tps sensor, i had a similar problem where it would stall when i pressed on the clutch. but my problem was the battery wires weren't connected fully and it was loosing power. most of the time it's sensors that are bad or not connected correctly.
 
Old Jan 27, 2010 | 05:15 PM
  #4  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,007
From: Tokeland, Washington
ROTM Winner's Club
Default

check the wires to the 02 sensors for any damge. could very well need new 02s. how does the exhaust sound. is it quiter than normal maybe hissing. plugged cat could be the problem also. egr is another thing to look at. iac is another.
 

Last edited by craby; Jan 27, 2010 at 05:25 PM.
Old Jan 27, 2010 | 06:49 PM
  #5  
'85_Tribute's Avatar
Thread Starter
|
Newbie
Joined: Jan 2010
Posts: 2
Default

Thanks for everyone's help, turned out to be the fuel pump. $900 later, she should be good to go.
 
Old Jan 27, 2010 | 06:54 PM
  #6  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,007
From: Tokeland, Washington
ROTM Winner's Club
Default

u can do the fuel pump yourself, do the booby hatch mod and u dont have to take the fuel tank out.
 
Old Jan 27, 2010 | 11:52 PM
  #7  
Tonylig928's Avatar
In the Staging Lanes
Joined: Apr 2009
Posts: 94
From: New York
Default

10 points for me!
lol i made a little door right on the back ledge in the middle and pulled it out that way i wish i took pictures because i welded it shut . you cut a hole big enough to fit the fuel pump threw and then you can make a couple of drill holes to seal the hole shut with a piece of sheet metal a little bit bigger than the hole and drill holes straight down an screw it in with some screws and it will always be easy access from there.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tommyboyink
67-69 General
5
Oct 20, 2011 12:11 PM
ShOtzFiReD88
93-02 V6 Tech
3
Jul 12, 2011 09:34 PM
drewscamaro
93-02 V6 Tech
29
Feb 10, 2011 05:27 PM
AmirGTR
93-02 General
25
Mar 13, 2010 08:28 PM
gammohr
82-92 General
3
Jun 8, 2006 01:43 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:03 PM.