I was thinking of putting some in my '94 camaro. How do you do it? Is it hard? Anyone ever done it?

I was thinking these: http://cgi.ebay.com/ebaymotors/93-94...Q5fAccessories

 

looks like it might be kinda cool

 

depends on what your goin for.
its gonna be a little bit of work cuz to get to your gauges you have to take the side pillars off(if you dont wanna risk cracking the dash plastic) then the dash, then some other plastic pieces. here is what i did to mine cuz i didnt like having white gauges in my car when everything is black.

 

thetal1...that looks sweet i noticed your oil pressure and volt meter are both higher than mine are in my 95 w/3.4

 

they normally sit there but once i start driving they sit just a tad lower.
the volt meter will drop a lot lower if i turn the ac on and all my lights and stereo up.(it mostly sits just under that line)
The oil pressure will move up and down when i shift (i have a stick shift) but its normally there.

 

same with my volt meter but my oil starts in the a little above the middle and goes down a hair and sits about the 1/4 mark at idle after its been running but mine is an auto

 

How did you do that i want that lol. did it come as a kit or did u do a bunch of custom work?

 

im curious also...please share

 

There is a glow needle kit on ebay for approximately $100. Can make your needles glow all sorts of different colors. Personally i just went with the white face that glows at night. But i must say, that blue needle glow looks AMAZING.

 

Sorry for the late reply but basically you replace about 9 of the 194 bulbs with 194 leds. Of course you have to get the gauge cluster out first