6 speed with 4.11?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-03-2014, 04:19 PM
Sudduth49's Avatar
Newbie
Thread Starter
Join Date: Nov 2013
Posts: 3
Default 6 speed with 4.11?

I have a 94 z28, 6 speed car with the factory 3.42 and am looking at replacing it with a 4.11 to drive on the street. How do these perform and is it too much or does the 6 speed have enough of an "overdrive" to make it feasible? Thanks
 
  #2  
Old 01-03-2014, 05:02 PM
craby's Avatar
April 2011 ROTM
ROTM Winner's Club
Join Date: Mar 2009
Location: Tokeland, Washington
Posts: 21,646
Default

there are a few guys on here with 6 sp 411 setup. should be about 2500 rpms at 65mph
 

Last edited by craby; 01-03-2014 at 05:06 PM.
  #3  
Old 01-03-2014, 06:13 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,362
Default

Since these are ratio is it easy to see your change in RPM.

3.42/4.11=1.202

So at any point you can take your current RPM time 1.202
 
  #4  
Old 01-04-2014, 12:37 PM
cbr600rx7's Avatar
NOOO they be stealin' my bucket
ROTM Winner's Club
Join Date: May 2007
Location: Fort Brag NC (no longer in iraq)
Posts: 2,200
Default

Its going to hurt your MPG a good bit running 4.10s or 4.11s. Posting your mods in your sig might help us point you the right way. Thats a big jump in gear if its a Daily Driver.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DiElSleL
82-92 Transmission & Differential
1
03-08-2012 01:23 PM
DiElSleL
82-92 General
0
03-06-2012 10:54 PM
rext
67-69 V8 Tech
0
09-23-2011 11:49 AM



Quick Reply: 6 speed with 4.11?



All times are GMT -5. The time now is 10:25 PM.