jkeaton's modding
#51
Got around to painting the front bumper cover.
Sanded
Primed
Base coat
Clearcoat
Came out pretty good for a rattle can job. I still have to buff it out and wax after it cures some more.
Finished product:
Sanded
Primed
Base coat
Clearcoat
Came out pretty good for a rattle can job. I still have to buff it out and wax after it cures some more.
Finished product:
Last edited by jkeaton; 10-04-2012 at 07:45 PM.
#54
This weekend I tackle changing out the turn signal switch and fixing my hazard flashers, changing out upper ball joints and installing a strut brace. Got me all the proper tools to pull the wheel and a lockplate compressor tool. Will post up a DIY if anyone is interested.
#57
Get this, the junkyard here wants $250 for a used one
I'll repair mine if i ever get the damn thing to release near the windshield (pulled the hell out of it and it still wont come off).
I'll repair mine if i ever get the damn thing to release near the windshield (pulled the hell out of it and it still wont come off).
#59
So nice to have a functioning trip meter again, and hazard flashers...turn signals, cruise, high beams....Not a bad job. Here's a few pics:
Removing the steering wheel:
Faulty turn signal switch:
Picked up a functioning odometer/trip meter out of a junkyard. Swapped the mileage part of mine with the mileage one on the donor odometer so I would have the same miles....works like a champ.
Removing the steering wheel:
Faulty turn signal switch:
Picked up a functioning odometer/trip meter out of a junkyard. Swapped the mileage part of mine with the mileage one on the donor odometer so I would have the same miles....works like a champ.