Windshield wiper problem
Thread Starter
|
1st Gear Member
Joined: Oct 2012
Posts: 203
From: Kentucky
Windshield wiper problem
Alright I suspect one of 2 things. The switch or the wiper motor. I'll take some thoughts from you guys who have owned camaro's a lot longer then I have.
Problem: Wipers only work on the High setting of the switch. When i switch them on high and turn them off, the wipers stop on the windshield wherever i shut them off at. However if I time it right and turn them off near the cowl, they will automatically go down to where their supposed to go.
Now the only other issue that the car as is the high beam. It will switch to high beam if i keep clicking the switch for them, but i have to keep clicking the switch to get them back to low beam. Not a real issue since i never use high beam, but it might be directly related to the wiper problem.
Anyhow feel free to give me your thought or suggestions.
Problem: Wipers only work on the High setting of the switch. When i switch them on high and turn them off, the wipers stop on the windshield wherever i shut them off at. However if I time it right and turn them off near the cowl, they will automatically go down to where their supposed to go.
Now the only other issue that the car as is the high beam. It will switch to high beam if i keep clicking the switch for them, but i have to keep clicking the switch to get them back to low beam. Not a real issue since i never use high beam, but it might be directly related to the wiper problem.
Anyhow feel free to give me your thought or suggestions.
3rd Gear Member
Joined: May 2012
Posts: 885
Alright I suspect one of 2 things. The switch or the wiper motor. I'll take some thoughts from you guys who have owned camaro's a lot longer then I have.
Problem: Wipers only work on the High setting of the switch. When i switch them on high and turn them off, the wipers stop on the windshield wherever i shut them off at. However if I time it right and turn them off near the cowl, they will automatically go down to where their supposed to go.
Now the only other issue that the car as is the high beam. It will switch to high beam if i keep clicking the switch for them, but i have to keep clicking the switch to get them back to low beam. Not a real issue since i never use high beam, but it might be directly related to the wiper problem.
Anyhow feel free to give me your thought or suggestions.
Problem: Wipers only work on the High setting of the switch. When i switch them on high and turn them off, the wipers stop on the windshield wherever i shut them off at. However if I time it right and turn them off near the cowl, they will automatically go down to where their supposed to go.
Now the only other issue that the car as is the high beam. It will switch to high beam if i keep clicking the switch for them, but i have to keep clicking the switch to get them back to low beam. Not a real issue since i never use high beam, but it might be directly related to the wiper problem.
Anyhow feel free to give me your thought or suggestions.
April 2011 ROTM
Joined: Mar 2009
Posts: 22,007
From: Tokeland, Washington
ROTM Winner's Club
Thread Starter
|
1st Gear Member
Joined: Oct 2012
Posts: 203
From: Kentucky
I think that may play a role in that problem. However as for the wipers i think its the wiper motor pulse board, I'm going to remove it and do some re-soldering to it later.
Thread
Thread Starter
Forum
Replies
Last Post
