programming key fob?

Old Feb 1, 2012 | 02:46 PM
  #1  
Niteblaster's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 13
From: Spencer NY
Default programming key fob?

Anybody know how to program a 94 camaro? I tried pulling the radio fuse and doing the on/off 3 times in 5 seconds but it doesn't work? Mine worked about 8 times when I first got the car and then wouldn't work again and I have replaced batteries 2 times and tested it at Autozone and it lights up on the display when I use it.
 
Old Feb 1, 2012 | 04:10 PM
  #2  
BasicConcepts's Avatar
Overdrive Member
Joined: Oct 2009
Posts: 4,597
From: Greenville, South Carolina
Technical User
Default

you need to take a peice of wire find the access data link beside steering column connect g and a together the locks will lock and unlock programmimg is in active mode then touch and hold down any button on you remote for 15 sec the doors will unlock and lock your done.


 
Old Feb 1, 2012 | 04:28 PM
  #3  
Niteblaster's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 13
From: Spencer NY
Default

Thank you very much. After i push the remote button do I just unplug the wire from G to A and will anything else need to be done to get it back out of program mode?
 
Old Feb 1, 2012 | 04:51 PM
  #4  
BasicConcepts's Avatar
Overdrive Member
Joined: Oct 2009
Posts: 4,597
From: Greenville, South Carolina
Technical User
Default

nope just pull the jumper wire out and your good
 
Old Feb 8, 2012 | 08:07 AM
  #5  
androzer's Avatar
2nd Gear member
Joined: Jan 2011
Posts: 351
From: Syria- Damascus
Default

If the car doesn't include a wireless entry system
dose connecting A & G leads to the locks will lock and unlock?
cause I have after market and I want bring the original fobs, want to make sure that I already have this option.
 
Old Feb 8, 2012 | 04:02 PM
  #6  
JGuy07's Avatar
2nd Gear member
Joined: Sep 2011
Posts: 483
From: Lebanon, Indiana
Default

Gna sound like a dumb question, because this is. But, what actual size batteries go in these key fobs? Mine has never had batteries in it and I haven't bothered to get them, so just wondering.
 
Old Feb 9, 2012 | 05:23 PM
  #7  
androzer's Avatar
2nd Gear member
Joined: Jan 2011
Posts: 351
From: Syria- Damascus
Default

no it's not there is hell of sizes and look of batteries like coin
good question and I am ready to hear an answer,
I put the car on ignition and connected A with G and nothing happend!
 
Old Feb 9, 2012 | 05:47 PM
  #8  
BasicConcepts's Avatar
Overdrive Member
Joined: Oct 2009
Posts: 4,597
From: Greenville, South Carolina
Technical User
Default

check your rpo codes and look for "AU0" thats keyless entry... its possible you dont have it even if you have power locks


and the batterys are 2016
 
Old Feb 22, 2012 | 06:15 AM
  #9  
Niteblaster's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 13
From: Spencer NY
Default

I finally got around to trying to re program my key fob. I did the jumper wire from a-g and the locks cycled 1 time but then nothing happens when I push any button on the fob. I have replaced batteries twice in the fob also. It did work when I first got the car for about a week if I was very close to the car but nothing now. I tested the fob at autozone to see if it lights up on the tester and it would barely light up. Could it be my fob is bad or is something else wrong?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kdm212
93-02 General
8
Oct 16, 2009 09:54 AM
Phil 2001
93-02 V6 Tech
7
Jun 27, 2008 10:48 PM
96ss1557
LT1/LT4 Tech
3
May 3, 2007 01:53 PM
tyler2497
93-02 General
1
Apr 11, 2007 10:43 AM
kender
LT1/LT4 Tech
4
Sep 27, 2006 09:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:17 PM.