okay so my oil pressure sending unit is on the drive side of block close to oil filter and the guy i bought it from put another one in it but was not able to figure out how the harness is ran because the old sending unit has what appears to be heat shield tape and feels like rubber under it with the wire running into the top through the opening so would i cut the rubber off the old unit to expose the clip or what?

 

nope it just pulls off unless someone taped it on. it has some stuff on it that looks like tape,,, sorta

 

well the guy left it zip tied cause he didnt know and i dont want to mess anything up the old one he broke off the end that screwed into the block, should that thing one wire or 2 cause the unit he put in has 2 pins in it.

 

without the heat shield

 

that was simple thanks alot now if the old owner knew he might be mad. lol. now on to my next fix. oh does any one here have a parts car and is willing to sell the dash pad? i dont want to cover it with the cloth cover and 250 buck for a pad is kinda high to me ebay has them for 125 but i am sketchy when it comes to ebay products.

 

this is the best price i have seen for a quality new one. i wouldn't go with a used one unless you know its not very old. Dash Pads, 6LE Designs LLC