My future Parts list

Old Dec 2, 2010 | 09:25 PM
  #11  
Chaotic94's Avatar
September 2011 ROTM
Joined: May 2010
Posts: 3,402
From: Missouri
ROTM Winner's Club
Default

I know for sure a 3.8 can be bored .040 over. A friend of mine with a 3.8 Firebird did his and it's holy cow, more peppy now! He also did exhaust, headers, intake, forged pistons, and a tune.
 
Old Dec 2, 2010 | 09:54 PM
  #12  
ChevyManCam's Avatar
Thread Starter
|
1st Gear Member
Joined: Nov 2010
Posts: 214
Default

how much more HP did it add?

and my original plan was not to rebuild the motor basically i just wanted to change over the gaskets to the second edition felpro makes. I figured since i would have the heads off i could do some other **** too. There is nothing wrong with my motor now, and I know from my experience as long as i maintain oil changes and such i could get this up to some really high miles without internal problems, I dont race, most i get my RPM's up to is 3k between shifts.
Ive been really lucky with Chevy(GM) and will always buy a Chevy.
 

Last edited by ChevyManCam; Dec 2, 2010 at 10:02 PM.
Old Dec 2, 2010 | 09:55 PM
  #13  
Chaotic94's Avatar
September 2011 ROTM
Joined: May 2010
Posts: 3,402
From: Missouri
ROTM Winner's Club
Default

I'm not sure but I drove it before and after and there was a very noticeable difference. He also put a stage 2 spec clutch in it.
 
Old Dec 2, 2010 | 10:19 PM
  #14  
ChevyManCam's Avatar
Thread Starter
|
1st Gear Member
Joined: Nov 2010
Posts: 214
Default

sweet, i was thinking about stage II clutch kit too. Though I sound like i want the very best, my chances of using it are slim if that makes any sense lol
Oh and after i replaced my cat, i did race a few times that day for fun. Now i just drive like a DD. Slow and listening to my system as it bumps.
 

Last edited by ChevyManCam; Dec 2, 2010 at 10:21 PM.
Old Dec 2, 2010 | 10:42 PM
  #15  
Chaotic94's Avatar
September 2011 ROTM
Joined: May 2010
Posts: 3,402
From: Missouri
ROTM Winner's Club
Default

I listen to my system bump AND drive it like its stolen hahah
 
Old Dec 2, 2010 | 10:58 PM
  #16  
BasicConcepts's Avatar
Overdrive Member
Joined: Oct 2009
Posts: 4,597
From: Greenville, South Carolina
Technical User
Default

To change the piston and cam your gonna need to pull the motor and your gonna need to pull at least 80% of the motor apart anyways so why not go the little further and clean it real well and it if your not gonna bore the cylinders there no real point in changing the pistons but a good thing would be new rings and bearings
 
Old Dec 2, 2010 | 11:09 PM
  #17  
ChevyManCam's Avatar
Thread Starter
|
1st Gear Member
Joined: Nov 2010
Posts: 214
Default

yeah i am planning a project for 2012 but was not thinking total engine removal However!!, its 1 year from now so who knows. Maybe ill just do it all at the same time.

lol @ Chaotic94, my system came with the car, its the cheapest setup ive ever seen but hey! it still bumps good, just need to replace 2 front speakers, and add 4 more, 4 missing.
 
Old Dec 2, 2010 | 11:11 PM
  #18  
Chaotic94's Avatar
September 2011 ROTM
Joined: May 2010
Posts: 3,402
From: Missouri
ROTM Winner's Club
Default

Dude my system is cheap too but it'll set off alarms. I have a Sony home sub in the back of my car lmao. RE Audio door speakers that are amped. and a Kenwood KDC-MP242 head unit.
 
Old Dec 2, 2010 | 11:16 PM
  #19  
ChevyManCam's Avatar
Thread Starter
|
1st Gear Member
Joined: Nov 2010
Posts: 214
Default

we might be OT now but oh well lol, my head unit is a pioneer and plays MP3, the sub is a 10" vision or some **** like that and the amp ha, never heard of them. and if my front speakers weren't shot i could turn up the juice, but the rattle from the front speakers drives me crazy!!
 
Old Dec 2, 2010 | 11:33 PM
  #20  
Chaotic94's Avatar
September 2011 ROTM
Joined: May 2010
Posts: 3,402
From: Missouri
ROTM Winner's Club
Default

Yeah my Sony sub is a 10". It pounds!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carman63
67-69 General
1
Jul 15, 2014 06:47 AM
tooltime
82-92 V8 Tech
1
Dec 2, 2011 09:15 AM
Bobert
Engine & Internal
0
Feb 14, 2010 03:09 PM
SixShooterCamaro
LT1/LT4 Tech
8
Aug 31, 2009 03:58 PM
sandsk8erz400
Detailing
11
Feb 13, 2008 02:22 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:13 AM.