Jordan, thanks again for the light list. Off to but LEDs ight now

Did the rverse glow thing, but dind't care for the fact that not everything lined up with the original cluster (ie, turn signal, SES light, etc). That and once the switch started going, it just became a hassle.

 

http://cgi.ebay.com/ebaymotors/LED-D...s#ht_525wt_913

this is everything i was looking for. i think ill still just order from superbrightleds.com because i am sure the ebay seller might not use the best bulbs and i might possibly save a few bucks.

 

Orange needles will turn red if you change the bulb to red.. There are RED 194 Bulbs. I used to have orange needles in my MX6, and when i changed the bulbs to red, they were sharp again and not a faded ugly orange colour..

 

yeah i think that will be my rought cuz i dont think blue will come out and unless i can scratch it off with a razor then im stuck.
luckly red will sorta go with the red already in the gauges but they will be a dark red due to the backlight being blue.

 

hay bud check these out.
http://6litereaterdesigns.com/store/...roducts_id=187

 

those are awesome but 90.00 is kinda steep

 

agreed... thats awesome.. and where did buddy get the nice looking cluster? home made or is it an edlebrock thing?

 

if you wanted to change the needles you would be best to get a donor gauge cluster and practice on that so as not to be without a cluster. i think i'm gonna just live with my needles and do this led mod looks easy enough.

 

I'm 3 steps ahead of you. I had a donor gauge cluster. I took it apart and today I found out you could just POP them off and scratch the paint off.

 

did you take any pics or have any advice on how to pop them off?