failed emmissions

Old Sep 27, 2008 | 11:20 PM
  #1  
stealthy95z's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Sep 2008
Posts: 85
From: CT
Default failed emmissions

they say that the egr works fine but its got alot of unburned gas. exhaust is magnaflow (unsure of exactly what it has but it does have a cat. kid I bought the car from says it has a lunati street cam, and it does have sort of a lopey idle so it may or may not, I dont know for sure.

I found it interesting that the emmissions guy said the egr works fine, because just after the valve the line is cut off and crimped. lol

no check engine light, and it seems to run good, but at 130,000 I guess it could use new plugs and wires. any other suggestions?
 
Old Sep 28, 2008 | 01:30 AM
  #2  
BeraniHull's Avatar
1st Gear Member
Joined: Apr 2008
Posts: 253
From:
Default RE: failed emmissions

New Cat?
 
Old Sep 29, 2008 | 05:48 PM
  #3  
ABKorrupt's Avatar
In the Staging Lanes
Joined: Aug 2008
Posts: 40
From:
Default RE: failed emmissions

check fuel injectors, not sure but does the street cam need bigger injectors? mine needed 2 to be replaced and still need to get the others cleaned...
 
Old Sep 29, 2008 | 06:22 PM
  #4  
z28pete's Avatar
Tech Droid
Joined: Aug 2005
Posts: 9,215
From: North East PA
Default RE: failed emmissions

Your mechanic probably just looked at the scanner, and as long as the EGR pintle was able to move, it saw no problem. However, you should take down the EGR, clean the passages and put back all the wires and hoses where they belong. If the EGR is blocked/choked off there is a good chance the engine will fail the NOx portion of the test. A hotter cam with no tuning will probably fail the HC portion. New plugs & wires and injector cleaner may help.
 
Old Oct 5, 2008 | 01:48 AM
  #5  
stealthy95z's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Sep 2008
Posts: 85
From: CT
Default RE: failed emmissions

any chance someone could post a pic showing where the egr hose goes, because I have no clue since it was cut off when I bought it....
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stealthy95z
LT1/LT4 Tech
14
Aug 28, 2009 08:51 PM
cmtison
70-81 General
1
Apr 30, 2009 02:23 AM
7d1camaro
New Members Area
2
Jan 7, 2006 10:59 PM
mattvogt
General Tech
1
Jun 26, 2005 01:51 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:16 PM.