96 ss spring replacement

Old Apr 16, 2010 | 03:15 PM
  #1  
frankzlt1's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jan 2010
Posts: 76
From: connecticut
Default 96 ss spring replacement

hi everyone
looking to change my stock springs to new eibach 1.3" lower than stock. would the stock shocks work or will i have problems
 
Old Apr 16, 2010 | 05:48 PM
  #2  
Carl Dan's Avatar
1st Gear Member
Joined: Jul 2009
Posts: 116
Default

how much are those eibach's? ie. sportline, pro-kit or what.
 
Old Apr 16, 2010 | 05:59 PM
  #3  
Carl Dan's Avatar
1st Gear Member
Joined: Jul 2009
Posts: 116
Default

also how is the current ride the springs mainly help with slower more gradual adjustments in the road little bumps and such and the shocks are what give you a smoother ride all in all. i doubt any problems will occur with the stock shocks but i would probably consider replacing those at the same time to save some money in labor cost's or your own time if you are doin it.

look into QA1 shocks they are a bit pricey about 180 a pair but that i believe is one of the brands that Lingenfelter uses on the Corvette and Camaro's they build... i think bilstein's are the others but the QA1's are adjustable. another brand i've seen on some people's camaro's are KYB AGX also adjustable. http://www.lingenfelter.com/mm5/merc...gory_Code=C297
 

Last edited by Carl Dan; Apr 16, 2010 at 06:14 PM.
Old Apr 16, 2010 | 07:03 PM
  #4  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

koni adjustables are the best but very spendy. strano has some 1.25 lowering springs that are pretty good. have a look at the site and give him a call. nice guy and good info.
http://www.stranoparts.com/
 
Old Apr 16, 2010 | 07:55 PM
  #5  
frankzlt1's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jan 2010
Posts: 76
From: connecticut
Default

Would it be a problem to use the stock shocks and will the rear get out of position when the suspension gets lowered over an 1"
 
Old Apr 16, 2010 | 08:19 PM
  #6  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

no and yes but u can run it for and be ok if the tires and rims are stock.
 

Last edited by craby; Apr 16, 2010 at 08:22 PM.
Old Apr 17, 2010 | 11:05 AM
  #7  
frankzlt1's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jan 2010
Posts: 76
From: connecticut
Default

Thanks craby I have the factory wheels and tires not planning to change wheels and tires my 96 is a ss and I like the that style thanks again for your help
 
Old Apr 17, 2010 | 11:31 AM
  #8  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

u bet. if it looks funny or trys so rub all u need is a adjustable panhard bar. they dont cost to much and are really easy to install.
 
Old Apr 17, 2010 | 02:48 PM
  #9  
frankzlt1's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jan 2010
Posts: 76
From: connecticut
Default

I had already replaced the lower control arms and pan hard bar to tubed type but the panhard bar is nonadjusable I hope I don't have to change it.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZL1
67-69 General
2
Nov 2, 2013 04:10 PM
T&GCAMARO
67-69 General
1
Apr 14, 2010 07:43 PM
aussiesmg
82-92 General
8
Dec 24, 2008 07:20 AM
toolbox
82-92 General
0
Mar 16, 2006 10:52 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:08 PM.