3.4 PCV Valve Location
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
lol, glad you could help you. have you downloaded the factory service manual for your year. http://www.mediafire.com/?40mfgeoe4ctti click on fb94
Thread Starter
|
In the Staging Lanes
Joined: Oct 2013
Posts: 91
From: West Seneca Ny
Both O2 sensors, replacement wires from autozone with double platinum plugs, and the pcv valve. I plan on the MSD coils and Taylor wires. Factory coils are only 20,000 volts from the sites i have read.
Last edited by Mikeroc283; Feb 17, 2014 at 09:23 PM.
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
air filter, brakes, test fuel pressure, outer tie rod ends go every 20-40k miles, shocks, check ball joints and wheel bearings, borla exhaust, kill stereo, wheels and tires,
Thread Starter
|
In the Staging Lanes
Joined: Oct 2013
Posts: 91
From: West Seneca Ny
Has cold air intake, Needs driverside outer tierod end, shocks need changing, has no converter with a flowmaster muffler, dont know on bearings or ball joints, still need to check the pressure.
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Thread Starter
|
In the Staging Lanes
Joined: Oct 2013
Posts: 91
From: West Seneca Ny
I sea foamed it earlier. No difference. Still idles at 1000 rpm. Took it on the highway behind my house, had it up to 80 and it was shaking all over like the wheels arent balanced or something is loose.
