i guess you didnt read what i wrote. injectors will always have power when the key on. and 11.6 volts is low, what is the voltage at the battery?

 

battery has 12.5v

 

check all the wiring. the volts are too low. and get yourself a noid light to see if they are actually firing.

 

i got a noid light and not enought voltage its pushing 11.9 now what would cause low voltage to the injectors

 

chances are theres a wire that is corroded internally or a loose connection somewhere. typicly well the volts are that much lower when there is no load on them, then there wont be enough amperage to fire the injectors. do you have a wiring schematic? if not, get one, and take apart the harness. could have happened during the swap. wires usually dont take kindly to being moved after sitting in one spot 20+ years

 

what is this wire for its black with a purple strpe
i looked in the hayes manual and cant find it

 

Why didn't you just use the 85 intake setup?

 

looks like the wires for the underhood work light