Hoods, Fenders, etc.

Old Mar 17, 2007 | 02:50 AM
  #1  
Iowa87CamaroRS's Avatar
Thread Starter
|
1st Gear Member
Joined: Mar 2007
Posts: 242
From:
Default Hoods, Fenders, etc.

As far as the front of the car, what 3rd gen fenders, hoods, and etc will fit my 91 RS?

P.S. I found out this is a 91...and totally screws up my name
 
Old Mar 17, 2007 | 03:10 AM
  #2  
350rs's Avatar
March 2008 ROTM
Joined: Apr 2006
Posts: 2,437
From: St. Louis, Missouri
Default RE: Hoods, Fenders, etc.

they all fit, from 82-92.
 
Old Mar 17, 2007 | 11:27 AM
  #3  
Iowa87CamaroRS's Avatar
Thread Starter
|
1st Gear Member
Joined: Mar 2007
Posts: 242
From:
Default RE: Hoods, Fenders, etc.

That's good news ...mine needs pretty much a whole new front clip...so this is good news, I'm thinking of putting a different hood on too...since it needs that...well gotta go to work see ya
 
Old Mar 17, 2007 | 02:21 PM
  #4  
350rs's Avatar
March 2008 ROTM
Joined: Apr 2006
Posts: 2,437
From: St. Louis, Missouri
Default RE: Hoods, Fenders, etc.

i personally like the Z28/IROC hoods a lot. Or a cowl induction if done right. 2 or 2 and a half inch lift at most in my opinion. Unless you need the clearance. There is also a daytona hood, which is kinda a combination of the two... very unique to say the least.
 
Old Mar 17, 2007 | 03:03 PM
  #5  
hurley870's Avatar
1st Gear Member
Joined: Jan 2007
Posts: 129
From: Allentown, PA
Default RE: Hoods, Fenders, etc.

the daytona hood kinda looks cheap to me, just my opinion
 
Old Mar 17, 2007 | 04:10 PM
  #6  
350rs's Avatar
March 2008 ROTM
Joined: Apr 2006
Posts: 2,437
From: St. Louis, Missouri
Default RE: Hoods, Fenders, etc.

in a way, it does yea, but also, it looks kinda cool. its all in how you think it looks i guess.
 
Old Mar 17, 2007 | 04:26 PM
  #7  
blkmgkcamaro's Avatar
March 2007 ROTM
Joined: Oct 2006
Posts: 263
From: Plymouth, Massachusetts
Default RE: Hoods, Fenders, etc.

i like them, it makes you look you got something under the hood. plus its way better than that boring stock hood. that weighs a ton.

[IMG]local://upfiles/5168/AB1416F495924CE9B98E8B144415B9E9.jpg[/IMG]
 
Old Mar 17, 2007 | 04:43 PM
  #8  
MadMikeZ28's Avatar
Overdrive Member
Joined: Jul 2006
Posts: 4,248
From:
Default RE: Hoods, Fenders, etc.

ORIGINAL: Iowa87CamaroRS

P.S. I found out this is a 91...and totally screws up my name
Now that is pretty far off.

The Daytona hoods, thier different. So you dont see a lot of them like cowl hoods. So I like them for that. But I like cowl hoods better.
 
Old Mar 17, 2007 | 08:30 PM
  #9  
microkid's Avatar
March 2011 ROTM
ROTM Winner's Club
Joined: Oct 2006
Posts: 2,615
From: Biglerville, PA
Technical User
Default RE: Hoods, Fenders, etc.

there are a few different noses out there, so be careful when chosing. there is the 82-83 nose, 84-85 nose, 86-92 nose. there are 3 grille options of none, vent, and the iroc style. there are also 2 lips of the regular style and the rs with the faux brake ducts. you can pick whichever you like. most people like the iroc style insert with the regular or rs lip, and they tend to sell high.
 
Old Mar 17, 2007 | 09:26 PM
  #10  
MadMikeZ28's Avatar
Overdrive Member
Joined: Jul 2006
Posts: 4,248
From:
Default RE: Hoods, Fenders, etc.

You almost have it all right. The Z28 bumper coverwas from 82-84 then 85-92. The RS was an 87 -92 model but uses the same cover as the Z28. The fenders were the same until until 91-92 but that is only for some mounting holes for the G/E.
The grilles there were the 82-84 two piece. The the 85+ standard or standard with fog lights. or the iroc with foglights and camaro or a bowtie in the middle.
The ground efects had the ones for the 82-84 Z28, Then they got bigger in 85. The got the duct added to the front in 90 and then in the doors as well in 91-92 for all RS and Z28.

But they will all bolt on to what he has.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mfmfim
93-02 General
19
Sep 15, 2010 10:03 PM
blowncamaro
LT1/LT4 Tech
1
Nov 22, 2009 10:22 PM
DUB C
93-02 General
5
Feb 2, 2008 11:21 AM
serendippity
Wheels, Tires and other Exterior
3
Jan 19, 2008 11:42 PM
biohazard
LT1/LT4 Tech
5
Jan 19, 2008 05:32 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:07 PM.