When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Our 67 has the factory K30 CC...Does anyone have a picture showing the hose connections from Servo to Regulator...the original diagram is tough to follow and want to make sure hoses are connected correctly. The problem is when I press the cc button on turn signal the car accelerates....any suggestions is appreciated, since this is a rare option not sure how much info is available to trouble shoot. The one document I found said trouble shooting when it does this is to swap
hoses at servo, this looks like only one hose going to servo. Thank you!
Last edited by camarokidrsss; 03-27-2022 at 09:24 AM.
Do you have a copy of the 1967 Service Manual? It contains a section on the Cruise Control System that includes troubleshooting. If you don't have a copy, you can download it here. The picture below show what the manual has illustrated for hose routing.
Nice picture above.
Here's an address with more pictures/diagrams one can imagine.
The large hose is supply vacuum from intake, the wo smaller go to the throttle regulator camaro heater vacuum line diagram - Bing images
Incidentally, nice Camaros' shown. Enjoy the rides.
Last edited by Everett#2390; 03-28-2022 at 06:52 AM.
03-27-2022, 08:55 AM
1967 Camaro RS/SS K30 Cruise Control
