Camaro Forums - Chevy Camaro Enthusiast Forum
Taken in Mason's Neck and looking over Occoquan Bay. Pushing the start button always feels special. Especially a cold start! 😁
Taken in Mason's Neck and looking over Occoquan Bay. Pushing the start button always feels special. Especially a cold start! 😁
0 2024/09/03 08:41:29
I feel very lucky to have my SS.
I feel very lucky to have my SS.
0 2024/09/03 08:41:21
Look at that ceramic shine!!! 6 years old with 17k. I has everything I want except my Bilstein setup.
Look at that ceramic shine!!! 6 years old with 17k. I has everything I want except my Bilstein setup.
0 2023/09/11 06:40:26
Just sealed with NEXGEN ceramic sealer and then ceramic wax.
Just sealed with NEXGEN ceramic sealer and then ceramic wax.
0 2023/09/11 06:40:22
Um....?????
Um....?????
0 2022/01/21 14:19:53
So I go back in 3 days to where I garage it and it reads zero. No oil is leaking, and since I didnt drive the car...None is burnt. Mileage is 6.9k.
So I go back in 3 days to where I garage it and it reads zero. No oil is leaking, and since I didnt drive the car...None is burnt. Mileage is 6.9k.
0 2022/01/21 14:19:48
0 2022/01/21 14:19:43
So you see the barrel on top and bottom. Ok...doesnt take a genius to know that the read should have oil in the grooves, nice and thick. Sometimes it looks low on oil, other times it doesnt read at all. I always take a read on a cold engine and on a level surface. I have had 15+ cars and am 50 years old. Not new at this. I am taking it over to the dealer. The only thing worse than underfilling the oil is overfilling.
So you see the barrel on top and bottom. Ok...doesnt take a genius to know that the read should have oil in the grooves, nice and thick. Sometimes it looks low on oil, other times it doesnt read at all. I always take a read on a cold engine and on a level surface. I have had 15+ cars and am 50 years old. Not new at this. I am taking it over to the dealer. The only thing worse than underfilling the oil is overfilling.
0 2022/01/21 14:19:39
2,000,000 horsepower (lol) I do realize that other tuners out the have put all kinds of gear on their hot rods. Please....any backlash on it is welcome, but I cant even think of a way to get more styke and HP for less $$$$. But I can tell you for certain that Brewer Customs tuned my car to 450RWHP and almost 500 crank hp
2,000,000 horsepower (lol) I do realize that other tuners out the have put all kinds of gear on their hot rods. Please....any backlash on it is welcome, but I cant even think of a way to get more styke and HP for less $$$$. But I can tell you for certain that Brewer Customs tuned my car to 450RWHP and almost 500 crank hp
0 2021/12/26 11:48:15
Well, everybody knows a nice a** when they see it.
Well, everybody knows a nice a** when they see it.
0 2021/12/26 11:48:08
The passenger side sitter where it turns up (zoom in on the drivers side and u can see). I superglued it, but will only take so much aerodynamic forces (wind) pushing down on it to break it off.
The passenger side sitter where it turns up (zoom in on the drivers side and u can see). I superglued it, but will only take so much aerodynamic forces (wind) pushing down on it to break it off.
0 2021/12/26 11:48:00
Merry Christmas, Hanukkah, and anything I missed. Speaking of missed....is there anything else I can add to my car that will m a me it handle etter in the rear? There is no give at all. I did put Bilstein adjustable coilover shocks in the back. (And front bilstein adjustable dual action struts with lowering springs).
Merry Christmas, Hanukkah, and anything I missed. Speaking of missed....is there anything else I can add to my car that will m a me it handle etter in the rear? There is no give at all. I did put Bilstein adjustable coilover shocks in the back. (And front bilstein adjustable dual action struts with lowering springs).
0 2021/12/26 11:47:51
Fresh from the shop. My numbers are off my shops dyno. 435 SAE HP 379 SAE TQ
Fresh from the shop. My numbers are off my shops dyno. 435 SAE HP 379 SAE TQ
0 2021/12/09 21:01:44
Only 1% of normal folks will even guess this is anything but a V8. It's not. Its a run of the mill 3.6 liter 335 hp V6. Except now it's a 435 hp (SAE NET) and 380 lb ft (SAE NET) super- nice running powertrain. When the S/C comes on you know it. What I didnt know was that at about 5500 RPM it blew past the traction control and spun the rear tires. Exhilarating in a straight line, but sobering to know I have a lot more power. The Brembo SS brakes are being held for me. "Upcycling"!
Only 1% of normal folks will even guess this is anything but a V8. It's not. Its a run of the mill 3.6 liter 335 hp V6. Except now it's a 435 hp (SAE NET) and 380 lb ft (SAE NET) super- nice running powertrain. When the S/C comes on you know it. What I didnt know was that at about 5500 RPM it blew past the traction control and spun the rear tires. Exhilarating in a straight line, but sobering to know I have a lot more power. The Brembo SS brakes are being held for me. "Upcycling"!
0 2021/12/09 21:01:35
After 4 dissapointing performing miles; the serpebtine belt blew. This was when I was halfway finished with pulling out serp belt pieces. The steel belts kept it all from turning to dust. It is evidence of incompetence. From this point forward; I am not happy. I have had no transportation for a month. I am patient but come December 6th it will be towed to a shop that has done "hundreds of e-force installations".
After 4 dissapointing performing miles; the serpebtine belt blew. This was when I was halfway finished with pulling out serp belt pieces. The steel belts kept it all from turning to dust. It is evidence of incompetence. From this point forward; I am not happy. I have had no transportation for a month. I am patient but come December 6th it will be towed to a shop that has done "hundreds of e-force installations".
0 2021/11/14 11:38:38
It took me two ours to get this mess out from behind the Alternator. I saved it and all the othet major components are ok. This was during my 2nd pull. If it isnt durable enough for Summit Raceway then its no good to me.
It took me two ours to get this mess out from behind the Alternator. I saved it and all the othet major components are ok. This was during my 2nd pull. If it isnt durable enough for Summit Raceway then its no good to me.
0 2021/11/14 11:38:28
My cat was just in the way. You can clearly see my Eaton TVS Roots style Supercharger. The wires that were so carefully to for beauty broke loose when the serp belt snapped again. My installer went over it step by step and after 2 snapped belts. Good tech feedback from Edelbrock finally agreed with my techs that its a bad Eaton TVS Supercharger. Cat is not included but we are considering using him to run the water pump. I am undeterred. My shop has done 5 of these. I'm being patient.
My cat was just in the way. You can clearly see my Eaton TVS Roots style Supercharger. The wires that were so carefully to for beauty broke loose when the serp belt snapped again. My installer went over it step by step and after 2 snapped belts. Good tech feedback from Edelbrock finally agreed with my techs that its a bad Eaton TVS Supercharger. Cat is not included but we are considering using him to run the water pump. I am undeterred. My shop has done 5 of these. I'm being patient.
0 2021/11/14 11:38:19
PLZ HELP!! How could I give up after all the work I did? She has BMW M3 coilovers made in Germany. Afjustable B-14 Bilsteins. With install $2 grand. BMR end links front & rear! So, SS diffuser, SS tailights, SS spoiler, front splitter, tinted windows, black wheels, & Pioneer powered subwoofer TS-WX1210A. I have CNC stainless & nickel plated "SCLT" badges in hand ready to screw on.
PLZ HELP!! How could I give up after all the work I did? She has BMW M3 coilovers made in Germany. Afjustable B-14 Bilsteins. With install $2 grand. BMR end links front & rear! So, SS diffuser, SS tailights, SS spoiler, front splitter, tinted windows, black wheels, & Pioneer powered subwoofer TS-WX1210A. I have CNC stainless & nickel plated "SCLT" badges in hand ready to screw on.
0 2021/11/14 10:29:54
This is how I found it. I was stunned at first, but after I carefully pulled out tve belts (just like pulling string out of a vacuum beater-bar. I was relieved that all hardaare but the crank extension was intact, and she started right up and I drove it on the flatbed. So....no disaster yet. Just have to let Edel. stress about it, not me!
This is how I found it. I was stunned at first, but after I carefully pulled out tve belts (just like pulling string out of a vacuum beater-bar. I was relieved that all hardaare but the crank extension was intact, and she started right up and I drove it on the flatbed. So....no disaster yet. Just have to let Edel. stress about it, not me!
0 2021/11/14 10:29:49
Does anyone have any experience with belts coming out of their slots and getting jammed in the alternator? Has anyone done this before? With an AHHA! Answer? I am driving hard but THATS WHY I BOUGHT IT! If it cant reliably do a couple pulls on a deserted section of road its no good to me or anyone. I hope EDEL comes up with a belt calibration solution.
Does anyone have any experience with belts coming out of their slots and getting jammed in the alternator? Has anyone done this before? With an AHHA! Answer? I am driving hard but THATS WHY I BOUGHT IT! If it cant reliably do a couple pulls on a deserted section of road its no good to me or anyone. I hope EDEL comes up with a belt calibration solution.
0 2021/11/14 10:29:39
You guys know thisbis my fav pic. The lines over the back wheels and all the bulges in the right places make me look back at it EVERY TIME I PARK. It is hard to drive, has bad ergonomics, horrible sightlines, and interior quality has not improved since my '87 Z24. I bought it to boost it. I can buy a Nissan Versa and drive that daily. This is supposed to be a daily driver but its a pain in the ass to park.
You guys know thisbis my fav pic. The lines over the back wheels and all the bulges in the right places make me look back at it EVERY TIME I PARK. It is hard to drive, has bad ergonomics, horrible sightlines, and interior quality has not improved since my '87 Z24. I bought it to boost it. I can buy a Nissan Versa and drive that daily. This is supposed to be a daily driver but its a pain in the ass to park.
0 2021/11/04 10:23:47
Looks vicious from every angle. SCLT is what I am going to lable the car. I left "max" on the back to call her Maxine, but only I need to know that. Any omage to another Camaro is kind of silly. It slots nicely in under the SS and is only short 20hp. RWHP is 380 and RWTQ is 325. Add 20% to these numbers and ypu get around 435hp and 370 lb ft of torque. It will also weigh 322 lbs less thsn an SS.
Looks vicious from every angle. SCLT is what I am going to lable the car. I left "max" on the back to call her Maxine, but only I need to know that. Any omage to another Camaro is kind of silly. It slots nicely in under the SS and is only short 20hp. RWHP is 380 and RWTQ is 325. Add 20% to these numbers and ypu get around 435hp and 370 lb ft of torque. It will also weigh 322 lbs less thsn an SS.
0 2021/11/04 10:23:40
SS additions are all from wrecked SS cars with original Riverside Blue paint. Note I even have the rear diffuser that is correct. I also added Nordshliffe tested and German made 4 wheel suspension. I have tried to do right by the car. I am going to have a stainless emblem made for the back. I costs like $150. I am calling it a "SCLT". The fake RS badges are going to be removed. I built it up with love. It doesnt deserve to be "fake". All in it cost $35,000. For 435hp. 👍
SS additions are all from wrecked SS cars with original Riverside Blue paint. Note I even have the rear diffuser that is correct. I also added Nordshliffe tested and German made 4 wheel suspension. I have tried to do right by the car. I am going to have a stainless emblem made for the back. I costs like $150. I am calling it a "SCLT". The fake RS badges are going to be removed. I built it up with love. It doesnt deserve to be "fake". All in it cost $35,000. For 435hp. 👍
0 2021/11/04 10:23:35
Just a pretty picture to show the dual mode exhaust, and I love the color. I added the SS wing, the diffuser at the bottom, and everything in between.
Just a pretty picture to show the dual mode exhaust, and I love the color. I added the SS wing, the diffuser at the bottom, and everything in between.
0 2021/10/11 09:01:25
This is the 19950 Supercharger. It runs off the crank just like mad max. Everything you need comes with it. This is a level one kit. Once this is installed it is tuned for Premium fuel and you can get this much power and NO MORE unless you add bigger injectors and a larger fuel pump. So, we want the stage one horsepower so it doesnt destroy the car.
This is the 19950 Supercharger. It runs off the crank just like mad max. Everything you need comes with it. This is a level one kit. Once this is installed it is tuned for Premium fuel and you can get this much power and NO MORE unless you add bigger injectors and a larger fuel pump. So, we want the stage one horsepower so it doesnt destroy the car.
0 2021/10/11 09:01:18
This is the best pic of "MAXINE". I bought at Carmax with 3.6k on it. Brand new as I could get and I changed the whole suspension with Bilstein B14's zinc and yellow coilovers that have been tested at the Nordschliffe and made in Germany. I lowered it an inch but my $20 GM end links are not adjustable. I bought BMR ELK-016 front adjustable end links to lock down the struts and sway bar so ot a ll works together. I am making an appointment at Summit as soon as I get her dialed in.
This is the best pic of "MAXINE". I bought at Carmax with 3.6k on it. Brand new as I could get and I changed the whole suspension with Bilstein B14's zinc and yellow coilovers that have been tested at the Nordschliffe and made in Germany. I lowered it an inch but my $20 GM end links are not adjustable. I bought BMR ELK-016 front adjustable end links to lock down the struts and sway bar so ot a ll works together. I am making an appointment at Summit as soon as I get her dialed in.
0 2021/10/11 07:40:39
It os a com hrre is the $5500 Edelbrock E-Force kit. Dont fool plwith your intake or exhaust. Just buy this kit. It has an Eaton TVS 1.76 w/ 7 lbs of boost. Its positioned on top of the engine and makes 100 hp and 100 ftlbs of torque (SAE NET). I used a rewards card and got $500 off, which paid for tax and freight. It is good, clean horspower. (RWHP 379 RWD torque:325). Did I mention the Edelbrock 3 year 36,000 mile POWERTRAIN warranty??? OMG.
It os a com hrre is the $5500 Edelbrock E-Force kit. Dont fool plwith your intake or exhaust. Just buy this kit. It has an Eaton TVS 1.76 w/ 7 lbs of boost. Its positioned on top of the engine and makes 100 hp and 100 ftlbs of torque (SAE NET). I used a rewards card and got $500 off, which paid for tax and freight. It is good, clean horspower. (RWHP 379 RWD torque:325). Did I mention the Edelbrock 3 year 36,000 mile POWERTRAIN warranty??? OMG.
0 2021/10/11 07:40:32
Here is my supercharger. Its an Eaton TVS 1.76 made through Edelbrock. Its sn E-Force Supercharger 19950 part number. It will have 390 RWHP and 330 RWTQ with the tune my guy is gonna run. 👌. Im so stoked but its on backorder. All in I am at $36,980 for a truly unique car.
Here is my supercharger. Its an Eaton TVS 1.76 made through Edelbrock. Its sn E-Force Supercharger 19950 part number. It will have 390 RWHP and 330 RWTQ with the tune my guy is gonna run. 👌. Im so stoked but its on backorder. All in I am at $36,980 for a truly unique car.
0 2021/10/09 20:12:34
Here is the full SS package with diffuser. Dual mode exhaust, and its proper quick. But sadly I had to get the 3.6 with the manual trans .....but the next pic solves any power problem that I may have.....
Here is the full SS package with diffuser. Dual mode exhaust, and its proper quick. But sadly I had to get the 3.6 with the manual trans .....but the next pic solves any power problem that I may have.....
0 2021/10/09 20:12:31
Fully sinister looking. Spent a lot dressing her up as an SS/RS. But I cant affort an SS. So I have been building it piece by piece.
Fully sinister looking. Spent a lot dressing her up as an SS/RS. But I cant affort an SS. So I have been building it piece by piece.
0 2021/10/09 20:12:23
I just love the curves a bulges. Taking her out on an appropriate road at high speeds is the most fun you can have with your clothes on!!!
I just love the curves a bulges. Taking her out on an appropriate road at high speeds is the most fun you can have with your clothes on!!!
0 2021/10/09 11:59:20
I had the red lights, no spoiler, nob
I had the red lights, no spoiler, nob
0 2021/10/09 11:14:07
0 2021/10/09 11:13:59
0 2021/10/08 16:11:03
0 2021/09/30 18:32:41
MAX is hungry for air and ⛽ and 🔥!
MAX is hungry for air and ⛽ and 🔥!
0 2021/09/30 18:32:36
This splitter, the rear diffuser, and SS wing gave me a good poser package. But after the Bilsteins were installed she was a whlle new animal. Its agressice but no stripes all over it. I like the color!
This splitter, the rear diffuser, and SS wing gave me a good poser package. But after the Bilsteins were installed she was a whlle new animal. Its agressice but no stripes all over it. I like the color!
0 2021/09/30 18:32:32
This is the Bilstein setup I bought for a k or so with the front splitter Iove. It has the rear diffuser as well. Now I sm DYING for Edelbrock to send. My installer is sure to call me whrn a gisnt crate ends up in his office. My neighbor wanted me to buy an AMG that only needs a water pump. Knowing MBZ its part is $550 and cost $6,000,000 for labor. Oh...2010 with bad water and 174k. I think I will keep my Chevy with 5,420 miles.
This is the Bilstein setup I bought for a k or so with the front splitter Iove. It has the rear diffuser as well. Now I sm DYING for Edelbrock to send. My installer is sure to call me whrn a gisnt crate ends up in his office. My neighbor wanted me to buy an AMG that only needs a water pump. Knowing MBZ its part is $550 and cost $6,000,000 for labor. Oh...2010 with bad water and 174k. I think I will keep my Chevy with 5,420 miles.
0 2021/09/06 01:52:03
These are my coilovers except mine use a lot more Zinc. These are already on the car, and it is fantastic now that the coilovers are on the car. I didnt know, but Bilstein coilovers like mone are tested on the Nurburgring on the S
These are my coilovers except mine use a lot more Zinc. These are already on the car, and it is fantastic now that the coilovers are on the car. I didnt know, but Bilstein coilovers like mone are tested on the Nurburgring on the S
0 2021/09/06 01:51:55
0 2021/09/01 12:12:01