Camaro Forums - Chevy Camaro Enthusiast Forum
almost through
almost through
0 2009/03/31 21:38:20
the old rusted area is pretty soft...
the old rusted area is pretty soft...
0 2009/03/31 21:34:00
dig the rubber gloves!
dig the rubber gloves!
0 2009/03/31 21:34:00
Cutting out the rusted area on the other side...
Cutting out the rusted area on the other side...
0 2009/03/31 21:34:00
Tapping the new piece into place
Tapping the new piece into place
0 2009/03/31 21:30:50
here the new piece is inserted about half way. This piece goes in between the outer skin and the supporting piece on the inside / backside.
here the new piece is inserted about half way. This piece goes in between the outer skin and the supporting piece on the inside / backside.
0 2009/03/31 21:30:50
preparing the new patch piece
preparing the new patch piece
0 2009/03/31 21:30:50
this is the panel from the other side...this one had a patch put over the rust many years ago. we will cut all this stuff out and fab a new piece and weld it in.
this is the panel from the other side...this one had a patch put over the rust many years ago. we will cut all this stuff out and fab a new piece and weld it in.
0 2009/03/31 21:27:01
like swiss cheese it was
like swiss cheese it was
0 2009/03/31 21:27:01
after cutting out the rusted section
after cutting out the rusted section
0 2009/03/31 21:27:01
the valance all cleaned up.
the valance all cleaned up.
0 2009/03/31 21:24:31
media blasting gets these things looking like new!
media blasting gets these things looking like new!
0 2009/03/31 21:24:31
This is the lower part of the front body panel group - blasted and ready for etching primer
This is the lower part of the front body panel group - blasted and ready for etching primer
0 2009/03/31 21:24:31
ah, there *are* cotter pins in there after all!
ah, there *are* cotter pins in there after all!
0 2009/03/31 21:22:58
IMG 0015
IMG 0015
0 2009/03/31 21:22:58
IMG 0012
IMG 0012
0 2009/03/31 21:22:58
IMG 0011
IMG 0011
0 2009/03/31 21:22:07
IMG 0009
IMG 0009
0 2009/03/31 21:22:07
IMG 0008
IMG 0008
0 2009/03/31 21:22:07
blasting the rusted area after outer skin cut off
blasting the rusted area after outer skin cut off
0 2009/03/31 21:18:46
blasting cleaned it up good!
blasting cleaned it up good!
0 2009/03/31 21:18:46
nice and clean now
nice and clean now
0 2009/03/31 21:18:46
Camaro Sig Photo
Camaro Sig Photo
0 2009/03/26 23:25:54
IMG 0031
IMG 0031
0 2009/03/26 08:47:17
0 2009/03/26 08:47:17
looks a little different after getting all the crud off...
looks a little different after getting all the crud off...
0 2009/03/26 08:46:05
Surface rust...but not bad!
Surface rust...but not bad!
0 2009/03/26 08:43:06
some rust at A pillar but not bad! This was a nice surprise - we weren't sure what we would find here. Sandblasting may reveal a little more surface rust but hopefully not deep stuff.
some rust at A pillar but not bad! This was a nice surprise - we weren't sure what we would find here. Sandblasting may reveal a little more surface rust but hopefully not deep stuff.
0 2009/03/26 08:39:14
after powerwashing...
after powerwashing...
0 2009/03/26 08:33:49
before powerwashing...
before powerwashing...
0 2009/03/26 08:13:51
Engine ready for machine shop
Engine ready for machine shop
0 2009/03/26 08:11:32
0 2009/03/24 19:05:00
some rust to take care of - nothing too bad though
some rust to take care of - nothing too bad though
0 2009/03/24 19:05:00
0 2009/03/24 19:05:00
shes lookin a lil bare now!
shes lookin a lil bare now!
0 2009/03/24 19:03:07
quarters are in decent shape
quarters are in decent shape
0 2009/03/24 19:03:07
much easier access now
much easier access now
0 2009/03/24 19:03:07
0 2009/03/24 19:01:08
0 2009/03/24 19:01:08
0 2009/03/24 19:01:08