Camaro Forums - Chevy Camaro Enthusiast Forum
Share Your Pictures with Our Community. Upload Now
will get to this next time we have a warm day outside
will get to this next time we have a warm day outside
0 2009/03/31 21:46:52
one more shot of the fresh looking subframe. almost looks like new!
one more shot of the fresh looking subframe. almost looks like new!
0 2009/03/31 21:46:52
another view of the rusted area revealed
another view of the rusted area revealed
0 2009/03/31 21:43:32
will have some more work to do underneath too...first we'll blast it to find other gotchas hidden by paint or rust
will have some more work to do underneath too...first we'll blast it to find other gotchas hidden by paint or rust
0 2009/03/31 21:43:32
the bumper bracket after being blasted and cleaned up
the bumper bracket after being blasted and cleaned up
0 2009/03/31 21:43:32
almost through
almost through
0 2009/03/31 21:38:20
when the old panel cut through on three sides we can bend it back to reveal the previously hidden rust
when the old panel cut through on three sides we can bend it back to reveal the previously hidden rust
0 2009/03/31 21:38:20
Cutting out the rusted area on the other side...
Cutting out the rusted area on the other side...
0 2009/03/31 21:34:00
dig the rubber gloves!
dig the rubber gloves!
0 2009/03/31 21:34:00
the old rusted area is pretty soft...
the old rusted area is pretty soft...
0 2009/03/31 21:34:00
preparing the new patch piece
preparing the new patch piece
0 2009/03/31 21:30:50
here the new piece is inserted about half way. This piece goes in between the outer skin and the supporting piece on the inside / backside.
here the new piece is inserted about half way. This piece goes in between the outer skin and the supporting piece on the inside / backside.
0 2009/03/31 21:30:50
Advertisement
Tapping the new piece into place
Tapping the new piece into place
0 2009/03/31 21:30:50
after cutting out the rusted section
after cutting out the rusted section
0 2009/03/31 21:27:01
like swiss cheese it was
like swiss cheese it was
0 2009/03/31 21:27:01
this is the panel from the other side...this one had a patch put over the rust many years ago. we will cut all this stuff out and fab a new piece and weld it in.
this is the panel from the other side...this one had a patch put over the rust many years ago. we will cut all this stuff out and fab a new piece and weld it in.
0 2009/03/31 21:27:01
This is the lower part of the front body panel group - blasted and ready for etching primer
This is the lower part of the front body panel group - blasted and ready for etching primer
0 2009/03/31 21:24:31
media blasting gets these things looking like new!
media blasting gets these things looking like new!
0 2009/03/31 21:24:31
the valance all cleaned up.
the valance all cleaned up.
0 2009/03/31 21:24:31
IMG 0012
IMG 0012
0 2009/03/31 21:22:58
IMG 0015
IMG 0015
0 2009/03/31 21:22:58
ah, there *are* cotter pins in there after all!
ah, there *are* cotter pins in there after all!
0 2009/03/31 21:22:58
IMG 0008
IMG 0008
0 2009/03/31 21:22:07
IMG 0009
IMG 0009
0 2009/03/31 21:22:07
IMG 0011
IMG 0011
0 2009/03/31 21:22:07
nice and clean now
nice and clean now
0 2009/03/31 21:18:46
blasting cleaned it up good!
blasting cleaned it up good!
0 2009/03/31 21:18:46
blasting the rusted area after outer skin cut off
blasting the rusted area after outer skin cut off
0 2009/03/31 21:18:46
m a64bd61c7a424a508dfa5913f26a0cce
m a64bd61c7a424a508dfa5913f26a0cce
0 2009/03/31 20:24:16
m 48a51060047d87e086a55c911e906d89
m 48a51060047d87e086a55c911e906d89
0 2009/03/31 20:24:16
m ae443889ca8e56a3476dc2350954fef5
m ae443889ca8e56a3476dc2350954fef5
0 2009/03/31 20:24:16
0 2009/03/31 20:17:02
Advertisement