LT1/LT4 Tech 1993-1997

what price should i pay for parts?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-28-2012 | 07:32 PM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default what price should i pay for parts?

So i met a dude whose selling a bunch of parts. What do you guys think i should offer?
-heads and intake that have been ported, but he does not have paper work.
-1.6 sa rr
-hardened push rods
-weld on sfc
-6al with lt1 wiring harness
-accel 30lb injectors
-Accel Phantom Electronic FP gauge with braided fuel pressure line
-10lb nitrous bottle
-nitrous mastermind nitrous system controler
suspension stuff is new, heads and intake havnt been used sense porting, everything else has "a couple hundred miles."
He totaled his car.
What do you guys think? Hes had the parts "laying around" for about a year
 
  #2  
Old 08-28-2012 | 07:34 PM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

is there a way to see what the heads have been ported too?
 
  #3  
Old 08-28-2012 | 07:36 PM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

and a front 35mm front sway bar.
 
  #4  
Old 08-28-2012 | 07:58 PM
Edwardgp's Avatar
3rd Gear Member
Joined: Dec 2011
Posts: 757
From: Washington State
Default

Bob that is quit a list, I would Google These web sights to start with. Summit, Jegs, Hawks, Spohn, amazon and e-bay to start with and get a notebook to keep track of the prices. Do not forget about the shipping charges.
 
  #5  
Old 08-28-2012 | 08:03 PM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

LT1 350 Heads and Intake these heads have 175/68cc intake/exhaust ports. The intake has been ported, polished and gasket matched, and is ready to be painted if desired. These heads and intake have not been used since the port job. I also have all brand new gaskets needed to install them. $800
1.6 ratio rockers and harden push rods. $100
Brand new set of weld on sub frame connectors (red). $100
23mm front sway bar new. $100
6AL Ignition, NEW, I also have the LT1 Harness. $150
accel 30lb fuel injectors. $125
Accel Phantom Electronic Fuel Pressure gauge with a braided fuel pressure line. $150
10lb Nitrous Bottle. $75
Nitrous Mastermind nitrous system controller $150
 
  #6  
Old 08-28-2012 | 08:05 PM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

thats what he posted, i know how to check prices, but i just wanted opinions on the used/not out of the box new prices, and the fact that is in bulk. He said hed do a package deal, but i dont want to low ball too much. And the fact that i have no clue about the work on the heads, if any
 
  #7  
Old 08-28-2012 | 11:50 PM
numskull223's Avatar
2nd Gear member
Joined: Sep 2007
Posts: 384
From: SC
Default

Originally Posted by bob97z28
thats what he posted, i know how to check prices, but i just wanted opinions on the used/not out of the box new prices, and the fact that is in bulk. He said hed do a package deal, but i dont want to low ball too much. And the fact that i have no clue about the work on the heads, if any
Its just me, But Id start low, 250.00- 300.00.
 
  #8  
Old 08-29-2012 | 07:31 AM
Edwardgp's Avatar
3rd Gear Member
Joined: Dec 2011
Posts: 757
From: Washington State
Default

numskull is right and have cash, keep the large bills on the outside rolled around the smaller bills.
 
  #9  
Old 08-29-2012 | 07:34 AM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

sounds good, what about max price?
 
  #10  
Old 08-29-2012 | 11:27 AM
bob97z28's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2011
Posts: 150
Default

how can i tell if they have been ported? any way to check how much
 


Quick Reply: what price should i pay for parts?



All times are GMT -5. The time now is 11:17 AM.