this is making me mad
#1
this is making me mad
so i just rebuilt the motor in my 95 z/28 but heres the kicker im getting coolent in my just in the heads none in the botom half i put new heads on and i know that the head gaskets are good and the motor only has 330 miles on it since the rebuild and for the life of me i can't figure it out so plz help!!!!!!
#5
in the valve covers `i can only tell that cuz the oil that is on the fill neck and cap is white and i believe that it is from the coolant if im wrong plz tell me also the heads are stock i got them off ebay cuz i didnt trust mine and i had my michinest check them out so i know those are not the problem
#7
im losing coolant and i have oil in my coolant i flushed everything out while i had it out and i think is my oil cooler is bad but i dont have any coolant in my crankcase so i feel like im running in circles with it
#9
sounds like u may have it figured out. the oil pressure must be enough to hold the water out while running and a little is getting to the oil while not running but not enough to show in the oil. u must not be losing to much water.
Last edited by craby; 05-29-2009 at 08:59 PM.