LT1/LT4 Tech 1993-1997

hey guys wut up

Old Aug 15, 2010 | 07:28 PM
  #1  
chevyman82's Avatar
Thread Starter
|
Newbie
Joined: Aug 2010
Posts: 5
Default hey guys wut up

i have a 94 z28 lt1 and it is missing and shuttering when it warms up also fuel drops as car starts acting up o and my volt gauge twitchs to
 
Old Aug 15, 2010 | 08:33 PM
  #2  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

take the cables lose on the battery and wire brush the heck outa the battery terminals and cable ends. then check to make sure the large wire on the alternator is clean and tight, also check it for any damage. you have a power junction on the passenger side fenderwell (little red plastid box with fliptop) check for any damage and clean the wire ends there as well. then check the grounds. you have a ground junction near the power one, clean if needed and check for tightness. there are grounds on the motor by the starter on the side of the block, one on the front passenger side under the belt tensioner, one on the driver side front, this one also has a ground strap that goes to the frame. how old is the opti? are you smelling gas? would be a good idea to have it scanned for trouble codes.
 
Old Aug 17, 2010 | 05:01 PM
  #3  
chevyman82's Avatar
Thread Starter
|
Newbie
Joined: Aug 2010
Posts: 5
Default

will cleaning cables opti is brand new lil hand held scanner want read my car heard somthing bout obd1 and obd2 dont know
 
Old Aug 17, 2010 | 08:07 PM
  #4  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

what scanner do you have? for obd1 or obd2
 
Old Aug 17, 2010 | 09:33 PM
  #5  
chevyman82's Avatar
Thread Starter
|
Newbie
Joined: Aug 2010
Posts: 5
Default

just some kind of blue point scanner it is an obd2 scanner
 
Old Aug 18, 2010 | 01:05 AM
  #6  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

you have a obd1 ecu. 94 was a transition yr so you may have a obd2 plugin. you will need a scanner that will work on a 94 camaro.
http://www.shbox.com/1/dlc2.jpg
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
iLL95
93-02 General
5
Sep 27, 2011 09:08 AM
97Maroman
New Members Area
2
Jun 26, 2010 11:03 AM
Mtowles
LT1/LT4 Tech
4
Mar 21, 2010 05:09 PM
z28rob18
General Racing/Tech
5
Nov 22, 2008 03:23 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:47 PM.