LT1/LT4 Tech 1993-1997

Eibachs

Old Aug 13, 2007 | 05:20 PM
  #1  
Br1emt's Avatar
Thread Starter
|
Newbie
Joined: Aug 2007
Posts: 2
Default Eibachs

I have a 94 z28 with 315's in the rear and 275 in front. A problem I had with passenger rear tire is that it was getting chewed up from the axle torque . Bought new tires and put in adjust. lower control arms and adjust. panhard bar as well as Eibach drag launch springs to make sure i don't have the same issue again. Now with the eibachs the wheel well gapis pretty bad. Iknow they werent supposed to lower it, just didnt think it would raise the car that high.I've had recommendations to cut down a section of the coils to help. Can that work? Anybody ever used eibach drag launch springs before? I just want to know if after some miles they level out slightly. Thanks.
 
Old Aug 13, 2007 | 06:11 PM
  #2  
z28pete's Avatar
Tech Droid
Joined: Aug 2005
Posts: 9,215
From: North East PA
Default RE: Eibachs

Did the springs come with air bags? If they did, just inflate the one on the right side, and the car won't ride as high.
 
Old Sep 18, 2007 | 12:45 AM
  #3  
chrismorales75's Avatar
1st Gear Member
Joined: Sep 2007
Posts: 126
From:
Default RE: Eibachs

I have drag launch springs and they do raise the car bit and most likely won't settle down, I cut a coil or so off of mine.
 
Old Sep 18, 2007 | 12:46 AM
  #4  
chrismorales75's Avatar
1st Gear Member
Joined: Sep 2007
Posts: 126
From:
Default RE: Eibachs

If it is chewing up the tire you might try a different style anti roll bar, my car will almost pull a rear tire when I corner hard =)
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:46 AM.