Engine & Internal Cams, heads, valvetrain, rotating assemblies. Chat about beefing up your insides here.

get speed outa my beast

Thread Tools
 
Search this Thread
 
Old Jul 26, 2005 | 08:04 PM
  #1  
blk79camaroproj's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jun 2005
Posts: 30
From:
Default get speed outa my beast

my friend just gave me a 350 shortblock with 10.5.1 compression pistions in it and well i paln on builing it up huge well heres the reason he gave it to me it has a kinda deep scratch on #5 cylinder wall lucky for me i have a friend that has a machine shop and he builds super latemodel motors well i was also told the motor in a mr2 prostreet car did 7sec @189mph well newho the car started to smoke so he tore the motor apart and the scratched cylinder wall made him take it out and let it lye and now it is all mine to have to eat all these stangs and tuners with turbos nos and all they got in my 79camaro yall here that if your a tuner and u read this your next when i get this motor built. well my curent motor is a 327 stroker and it let go 3 nights ago smoke and earl out both headers racing a mazda rx7 because i wanted to prove dewd wrong i ran street tiers and i tured thosee into smoke about 3/4 over the 1/8 mile and it was @about 8500 i let out and yes i know bad move i jumped back into it tiers spun again and i thought F***it and stuck with it and i blewer sky high almost crashed my car cause all the oil out the headers and im shure i also locked up 2nd gear well i beat that danm tuner yall here that tuner if u have a son that wants a tuner make him read this cause i blew MR rx7 away but i blew thats how deadacated i am well i also got 1000 out the track for my win and 500 of the dewd cause he made a side bet with me so that 1500 goes twards a demon race carb all adj yes this motor will have noparts off old motor because its bad luck
 
Old Jul 27, 2005 | 12:42 AM
  #2  
blk79camaroproj's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Jun 2005
Posts: 30
From:
Default RE: get speed outa my beast

ooooooooo yea tell me how u think i should build my motor open to all just want to hear how yall think and what i will be up against
 
Old Jul 28, 2005 | 04:11 PM
  #3  
JD1969's Avatar
4th Gear Member
Joined: Jun 2005
Posts: 1,687
Default RE: get speed outa my beast

I really just don't know what to say here. Umm maybe if you tried asking in english? Seriously dude your posts are impossible to read.
 
Old Aug 11, 2005 | 02:27 AM
  #4  
z28pete's Avatar
Tech Droid
Joined: Aug 2005
Posts: 9,215
From: North East PA
Default RE: get speed outa my beast

Whatever you do, put a rev limiter on your car sothat you don't blow the next engine.

You really want to go fast? Put on an 871 blower 2:1 overdrive, 7:1 compression, Enderle injection, and run on 90% nitromethane & 10% methanol, not nitrous. Dont know if a 350 chevy block can take it, might just blow the whole bottom end out on the street, but the noise should be impressive.

However, being that you are so dedicated, this should be no problem. Also try writing in English so we can get a better idea of what you are talking about.
 
Old Sep 27, 2005 | 03:32 AM
  #5  
Don Hog's Avatar
In the Staging Lanes
Joined: Aug 2005
Posts: 48
From:
Default RE: get speed outa my beast

try stickin on a couple of those honda vtec badges....good for at least another 50 hp
 
Old Sep 28, 2005 | 09:10 PM
  #6  
bad2801's Avatar
Newbie
Joined: Sep 2005
Posts: 25
From:
Default RE: get speed outa my beast

Dont forget about all the sponsor stickers...and was a rice car really worth blowing up your car...i know they need points proven to them...now that guy went home and told his little rice buddies that he blew up a camaro...i live next to one of those kids. There is still an open challenge for pinks.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craby
LT1/LT4 Tech
33
Sep 16, 2014 01:05 PM
flynz28
Engine & Internal
1
Jan 6, 2011 08:09 PM
jimmerz
New Members Area
3
Nov 11, 2008 03:52 PM
mattvogt
70-81 General
2
Jun 6, 2006 07:15 PM




All times are GMT -5. The time now is 02:45 AM.