93-02 V6 Tech V6 Camaro General Topics.

V-6 3.8L Car starting issue

Thread Tools
 
Search this Thread
 
Old Nov 9, 2009 | 12:07 PM
  #1  
-=Scorch=-'s Avatar
Thread Starter
|
Newbie
Joined: Jun 2009
Posts: 7
From: Halifax, NS, Canada
Default V-6 3.8L Car starting issue

Here's what's going on. Just recently after the temperature seemed to drop between 0 and 10 degrees Celsius, my car is fighting to get started. after three tries the car will start. I let it run for five minutes and stopped the engine. When I tried starting again it starts up perfectly. It's been doing this every day for the last week or so.

Today it's a balmy 15 degrees Celsius outside, I haven't touched the car for two whole days and the car started up perfectly this afternoon.

Any ideas where I should start?
 

Last edited by -=Scorch=-; Nov 9, 2009 at 12:10 PM.
Old Nov 9, 2009 | 12:32 PM
  #2  
evilkal's Avatar
4th Gear Member
iTrader: (1)
Joined: Mar 2008
Posts: 1,633
From: Kentucky
Default

Is the fuel pump kicking on? It may be going out and taking a minute to build up pressure
 
Old Nov 9, 2009 | 04:19 PM
  #3  
Jonny Dubyah's Avatar
1st Gear Member
Joined: May 2009
Posts: 149
From: SE Kansas
Default

Im having a similar issue..its not bad just seems that since its been coolng off the car doest want to start right up (it used to start within 1-2 turn overs) i wouldnt say its havimg "problems" starting..just not as easy as it used to be.
 
Old Nov 9, 2009 | 05:30 PM
  #4  
Toneman07's Avatar
1st Gear Member
Joined: Aug 2009
Posts: 285
From: Henderson/Las Vegas
Default

any codes??? sounds like crankshaft position sensor to me
 
Old Nov 9, 2009 | 06:00 PM
  #5  
Jonny Dubyah's Avatar
1st Gear Member
Joined: May 2009
Posts: 149
From: SE Kansas
Default

Its not a pump issue for me..i can smell te gas if i keep cutting it off too early..no codes..it did it on the cooler nights of the summer when i had it too..
 
Old Nov 9, 2009 | 08:28 PM
  #6  
Toneman07's Avatar
1st Gear Member
Joined: Aug 2009
Posts: 285
From: Henderson/Las Vegas
Default

might be a vacuum leak somewhere
 
Old Nov 9, 2009 | 08:30 PM
  #7  
Toneman07's Avatar
1st Gear Member
Joined: Aug 2009
Posts: 285
From: Henderson/Las Vegas
Default

just a random thought have u had battery and starter tested?
 
Old Nov 9, 2009 | 09:54 PM
  #8  
-=Scorch=-'s Avatar
Thread Starter
|
Newbie
Joined: Jun 2009
Posts: 7
From: Halifax, NS, Canada
Default

I finally get some time tomorrow to take it into the garage and poke around. Car worked fine all day today.
 
Old Nov 10, 2009 | 12:46 AM
  #9  
Jonny Dubyah's Avatar
1st Gear Member
Joined: May 2009
Posts: 149
From: SE Kansas
Default

hmm..battery may be possible.no idea how old it is..im leaning aginst vaccum leak..its only a problem on start up..ill get my bttery tested at lunch tomorrow...
 
Old Nov 11, 2009 | 12:22 AM
  #10  
Dznuts's Avatar
Newbie
Joined: Sep 2009
Posts: 27
Default

Originally Posted by Toneman07
any codes??? sounds like crankshaft position sensor to me


X2 mine is having that and thats what my problem is haha
 



All times are GMT -5. The time now is 03:06 PM.